How to format your compaq deskpro help

Sounds like the video card has quit. It may also have onboard video. I would try a new video card or try onboard video (if equipped). Good Luck

code 304 = Keyboard or system unit error. Not repairable. You will have to replace the system board.

U can format ur hard disk and reinstall win 2000

reinstall or upgrade your bios. also your bios will have an option to disable the logo so first try to disable it and then enable it again

Probably your power supply. They are pretty cheap to replace. If it's plugged into a power bar then try plugging it directly into a wall socket just to make sure it isn't your power supply.

its may ur cmos battery problem u can replace ur cmos battery and check that prolem

if D drive was a partition on your hard drive it was very likely formatted ....


Robert

take the old ram chip(s) out. The speed should be the same. e.g. PC100, PC133 etc. and install your new chips

just use the link below and select your product type

http://h20180.www2.hp.com/apps/Nav?h_product=82702&h_cc=us&h_pagetype=s-001&h_page=hpcom&h_lang=en&lang=en&cc=us

after that search for Download drivers and software link for your operating system as you told it is windows 2000.now select the drivers you want to download according to your need........enjoy
-------------------------------------------
low feed backs hurt my ratings and I am tring to help you with your problem,so let me know that the information i given you is helpfull or not

dilipbagdi

Dimensions: 254mm = 10.0" x 218mm = 8.5 inches. This is the current size of motherboard in the Compaq.
http://stason.org/TULARC/pc/motherboards/C/COMPAQ-COMPUTER-CORPORATION-Pentium-DESKPRO-2000-P.html