My HP Officejet Pro L7580 prints one page and then stops

click on this link to go to the printer user manual and you will see how to use your printer to print both side .http://www.generalmanual.com/Printers/HP-Officejet-Pro-L7580-Color-All-in-One.htm

To walk you through I'd need to know the OS you are running, but the generic answer is that you need to go into the print driver, and in the Printer Properties, under the ports tab , select the USB002 port rather than the DOT4 port and Apply the changes.

The printer will work with a wireless network, but you will have to set up your router or AP to broadcast a wireless signal, then configure the printer to communicate with the access point. Please see this HP support article, and this home support page for your printer. (or choose from here.)
Then, depending on your particular operating system, read about setting up a home wireless network here by choosing your os and then searching the help & how-to page for wireless networking or setting up a wireless network. You will find step by step instructions. Also check the support site for your router or AP, as they will have instructions specific to your router.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Open the web page as http:\\10.3.3.139 and click on webscan to scan .

Hello!
In order to install your scanner, you need to print a test page. As you need to align the cartridges, you also need to align your scanner. See the printed alignment page for directions on how to complete the alignment process. Basically, all you have to do is put the test page in the scanner and press scan.

Try this. Go to WWW.hp.com and let the website find your printer and install the sotware automatically.

http://www.userdrivers.com/Printer/HP-Officejet-Pro-L7580-Color-All-in-One-Basic-Driver-for-Windows/

please rate

YOUR PRINTER IS NOT A WIRELESS PRINTER IT CAN BE USED USING AN ETHERNET CABLE TO THE PRINTER FROM THE ROUTER

STEPS
+++++++
SETUP>>NETWORK>>RESTORE NETWORK DEFAULTS

SETUP>>NETWORK >>WIRELESS RADIO>>ON

CONNECT THE ETHERNET CABLE FROM THE ROUTER TO THE BACK OF THE PRINTER.

SETUP>>NETWORK >>PRINT NETWORK CONFIGURATION PAGE

INSTALL THE PRINTER
SELECT WIRED CONNECTION
AND INSTALL
IT WILL PRINT.

OR IF YOU WANNA USE AS WIRELESS YOU CAN USE WPUK (WIRELESS PRINTING UPGRADE KIT)

FROM HP.COM HOPE IT FIXYA

Hi, 


Change the paper type and paper size and that should resolve the issue.
Regrads,  raj_p5983

Hi,

Thats not true sir.
I was in HP as tech support and i have helped many customers in networking the Printers between different OS.

Thanks
Riz
([email protected])