MY REGISTER ONLY BEEPS NO MATTER WHAT YOU PRESS

Question edited for clarity and to add MAKER.
Question moved from Land Phones to make model category.

Normally because a transaction wasn't finished, for instance hitting a discount key where the choice is 5% or 10%, not hitting the number and then pressing Total.

Or you are in X or Y Mode and not in Reg.

You can try turning the key to off, remove the wall plug for 1 minutes and then plug it back in.

https://www.google.com/search?q=XEA207+beeps+when+we+try+to+ring+up+a+sale

..

It means you are not logged on. Look for the clerk button and log in

try to do an 'initial clear'
turn power switch on right side of reg to OFF pos
turn control lock to P position
press and hold SBTL key and turn power switch to ON pos
should print 'Initial clear ok'
might need to repeat a couple of times

check and replace your power supply

to refund a plu in the middle of a transaction, press the RF button first, then the plu # and then press the PLU key.

Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
Looking for a manual for a Casio TE-2200, TE-2400 cash register? Go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

It means you didn't finish in the other mode before you turned the key. You need to turn the key back to where you were (presumably prog mode) and finish the programming. It sounds like you have a Casio, so you would press SUBTOTAL to end programming before moving to REG mode. ------------------------------------------------------------------------------------------------------
Anyone looking for Casio cash register manuals? Try c-tech
http://the-checkout-tech.com/manuals/

The reason it went into error is due to someone turning the key to another mode without finishing the current transaction. Turn the key to each mode until you find the mode that doesn't give error 1. If that mode is X or Z, then press SUBTOTAL. If that mode is REG, then press SUBTOTAL to see the amount due, then type that amount and press CASH
--------------------------------------------------------------------------------------------------------
Need a manual for a Casio 240CR? Try here:
http://the-checkout-tech.com/manuals/cashregisters/Casio1.php
Many others at http://the-checkout-tech.com

Hi.

Try this:

Turn key to program mode.

0
CASH
SUBTOTAL
3
SUBTOTAL
0
CASH
SUBTOTAL

Mark

Hi. You have set the register to program mode. Turn the key back to Z/PGM, then press SUBTOTAL (you might have to press it twice).
It may print a list. This is normal. Then turn back to reg mode, and you should be back in business.

Mark