Question about 3Com SuperStack Computers & Internet

Open Question

HTTP/1.1 404 NOT FOUND! is coming while connecting the 3 com switch

I assigned the ip address for the 3 com switch 4 year back. Now i am trying the open the switch from browser it is giving 1.1.404 not found. But i am able to ping the switch ip address.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
remt23c
  • 78 Answers

SOURCE: EOC-3220 connects but no internet access

What are you using for Internet connects? do you have the Access point connected to a Router. or is it connected to the Cable or DSL modem. I will need more information to complete this. If you have a router is is set to give an IP address or do you have a static IP? If it is set to give a Dynamic ip change the access point to recieve ip address from router and same with computer. If your connected directly to the Modem with the access point and you only have one IP address it will be used by the access point and not allow the computer to connect.
for more help please provide your internet (DSL, T1, CABLE) if you have router,  how it provides IP, and how access point is connected to it.

Posted on Oct 31, 2007

Ad
  • 6 Answers

SOURCE: internet/ mms setting (PLEASE!!!!!!!!!)

Mine works fine- here are my settings on thePrada (multimedia settings for messages)

T-Mo MMS as connection
Proxy port is 9201
Proxy IP is 216.155.165.50
Internet mode is WAP
Profile name is T-Mo MMS
MMSC is http://216.155.174.84/servlets/mms

hope this helps

Posted on Dec 17, 2007

  • 4 Answers

SOURCE: Open Port 81 on Netgear Switch

Actually you need to open the port on the cable modem / router. Switches just pass the packets along.

Posted on May 22, 2008

Z3r0k0nTr0l
  • 39 Answers

SOURCE: cannot connect 2nd computer

you can always give it a static ip...if you need to know how to do this repost here..

Posted on Jan 27, 2009

SteveRand
  • 210 Answers

SOURCE: Sending DHCP request across diffrent vlans

Hmm... on your DHCP server, try setting the "default router" IP for each pool to be the VLAN ID on the switch.

scope 172.16.0.0 /24
router 172.16.0.1

scope 10.20.8.0 /22
router 10.20.8.1

I think the DHCP replies aren't going back where they should. I've never done this without a router doing all the DHCP, but it does work and i've done it many times. Your config looks spot on for the switch.

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not assign IP address


Steps for these found on http://support.xbox.com/en-US/xbox-live/connecting/error-cant-obtain-ip-address-router-modem-978976 and include
1. Restart modem and router2. Check wireless password3. Configure IP settings manually 4. Set an alternate MAC Address5. Turn on DHCP.6. Bypass router entirely and connect instead to the modem using a wired connection

Aug 09, 2012 | D-Link DGL-4500 Wireless Router

1 Answer

I want to connect my SCX 4500w to a new network (wireless). when i try to use a web page to configure the printer settings it doesn't response... I check the IP and write in in my Internet Explorer,...


You could try having your Samsung SCX-4500 print out a network configuration sheet. It will have the printer's IP address, default gateway etc.:

1) Press the <Menu> button on your printer panel
2) Scroll using the (<) or (>) navigational arrows until "Network" is displayed
3) Press the <OK> button
4) Scroll using the (<) or (>) navigational arrows until "Network Info" is displayed
5) Press the <OK> button

Your printer should print out a network configuration sheet. The IP of the printer appears in the TCP/IP information on this configuration sheet.

Note: Your printer's IP assignment should be "Static" not "DHCP" (You may skip the following steps if your printer's IP assignment is already "Static")

To change your IP assignment from DHCP to Static:

1) Open up your Windows browser
2) Type in the printer's IP address in the address (location) bar of your browser:

Example: http://192.160.0.100 (use the real IP you found above from the network information sheet)

3) SyncThru should load - Click "Network Admin" or "Network Settings"
4) Click on the "TCP/IP" option on the left side
5) Change the IP address METHOD to "Static"
6) Click <Apply>, then <OK> or <Exit>

Now your printer is ready to be added to your network. You have the information you need from your network configuration sheet. Your install should now proceed smoothly.

I hope this information was helpful!



Mar 07, 2010 | Samsung SCX-4500 Laser Printer

5 Answers

What is the ip address for it's network/ethernet card?


The external ip address (the one assigned by your isp) can be found at: http://whatismyip.com/

The internal ip address (differentiates the computers on your network) can be found by running the command prompt (start --> run--> cmd or start--> all programs --> accessories --> command prompt) and then typing int eh following command: "ipconfig" (without quotes). It will be the set of numbers in the form 192.168.something.something

Good luck, let me know if you have any questions

Dec 28, 2009 | HP Pavilion a1410n (ER890AA) PC Desktop

2 Answers

How to configure dmz on linksys wireless n router?


  1. Log into your router. (If you need help how to do it let me know!)
  2. Go to th "Application & Gaming" tab.
  3. click on "DMZ"
  4. choose "Enable"
  5. Enter the IP address of the computer you want to put in the DMZ.
  6. Click "Save Settings"
Some notes:
  • Putting a computer in a DMZ is pretty risky, because all ports to this computer are opened. Make sure that all recent patches are applied and your virus software is up to date! A more secure solution is to use portforwarding. (See this site how to do that for a specific software for your router.)
  • Your computer should be set to a static IP. For two reasons:
  • A) DMZ will not work if your DHCP server (your router) assigns at one point a different IP address to your computer,
  • B) If a different computer gets the Ip address assigned that you specified in your DMZ settings, then that machine is exposed.
If you don't know how to assign a static IP address, let me know and I walk you through the steps.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Aug 08, 2009 | Port Designs Linksys Wireless-G Broadband...

1 Answer

Nortel NetDirect error on Vista


Hi kt_rutherfor, Firstly apologies for my late reply. I thought that this was going to be a firewall problem, but looking at your error again, I now dont think that. So I'm afraid that I dont know the answer to this, I do have an idea, after researching the problem that this is a Remote-NDIS host problem. Your Uni should be able to help you with this even if it isn't at there end.

Again sorry for not being able to help

Apr 07, 2009 | ASUS T3200 Notebook

2 Answers

Dynex 4 port Hub


Try to assign an IP address to the second computer like 192.168.0.101 Subnet 255.255.255.0 and Default gateway 192.168.0.1

Note: This one is an example of IP address, the IP address that you need to assign is in range to the router that you have or with in range to the modem.

Mar 08, 2009 | Computers & Internet

2 Answers

Oki3400n - how to assign a static ip address


I found this post via Google trying to solve the similar problem with C3200n.

>> this will then cause problems as all the pcs that are trying to print to this
>> printer will no longer be able to find the printer.

Originally, I also had this problem (with C200n, but it is probably similar). If I recall correctly, I solved it as follows:

1. Open the OKI LPR UTILITY from the machine you are trying to print from.
http://img8.imageshack.us/img8/4552/okilprutility2009080217.png

2. Choose Option > Setup
http://img8.imageshack.us/img8/9641/setup20090802171057.png

3. Make sure that the Auto Reconnect checkbox is checked.

Again, I believe that is what I did to solve that I couldn't print after power outages etc. The IP is not static, but it still solves the problem.

---------
Static IP

Today I wanted a static IP for my OKI C3200n because sometimes there would be conflict between the IP for my printer and another machine in the house with a static IP.

What I did was the following.

1. In the printer menu locate the NETWORK MENU
http://img35.imageshack.us/img35/6889/dscn0525e.jpg

2. Go to the IP ADDRESS SET option, change from AUTO to MANUAL
http://img25.imageshack.us/img25/6122/dscn0526x.jpg
http://img195.imageshack.us/img195/7987/dscn0527j.jpg

3. Go to the IP ADDRESS OPTION, change to the desired ip address. In my case it was at 10.0.0.5, but I wanted 10.0.0.6 for the printer, so I changed it to that. Typically this is either 10.0.x.x or 192.168.x.x

http://img35.imageshack.us/img35/4407/dscn0528p.jpg
http://img90.imageshack.us/img90/1669/dscn0529r.jpg

4. Press the online button. The printer will reset the network connection (it took approx 1 minute)
http://img195.imageshack.us/img195/2539/dscn0530.jpg

5. This should be enough. You can try to ping the printer at the new IP, or navigate to the new IP in your browser:
http://img44.imageshack.us/img44/565/c3200nopera200908021755.png

Feb 01, 2009 | OKI C5400 Laser Printer

1 Answer

Belkin wireless router not assigning IPs for wireless clients


Some routers start handing out DHCP wireless IP's at 192.168.2.100. Try setting the upper limit at .110. If the router is found in a site survey (view wireless networks) but cannot connect, the limitation would be why.

Jan 10, 2009 | Belkin (F5D7230-4) Router (587009)

2 Answers

Wrong ip address


Are you trying to get an IP for your computer, or for your modem? Assuming your using a high-speed connection, possibly a router?

Mar 28, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

john smith

Level 2 Expert

406 Answers

didi2005

Level 3 Expert

727 Answers

Håkan Sterner

Level 2 Expert

74 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...