Question about Kenmore 43042 Front Load Washer

1 Answer

Kenore front loader model #481027 water starts to fill then stops

The water starts to fill then 2-3 minutes later stops filling then then starts to fill then stops& doesn't fill up or shut off and doesn't do anything else; no other functions are working (ie. spin, drain)....this was just purchased/installed approx. 6 wks ago & is stackable...pls. advise thanks....

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 370 Answers

You may have a faulty door switch.

Posted on Nov 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Constant filling and siphoning of water sans cycle.


Remove the front panel and open the control panel. Check all wires for loose or broken connections.

Dec 06, 2011 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

My washer fills and doesn't stop. I try to advance it to the spin cycle but none of the cycles work. I changed the lid switch because it wouldn't fill at all. Now it fills and nothing else. Tested...


The fill switch is bad. That's the only "safety" on the washer that will shut the water off after reaching desired depth. To test it, run your machine on the various water levels. For example, start out on the low setting. If the water doesn't shut off after the tub is half full, then it's the fill switch inside the unit next to the tub.

Sep 13, 2011 | Washing Machines

1 Answer

Bosch SHU3036UC/U11 dishwasher does not stop filling with water


Hi,
It sounds as if the main program board has developed a fault - as it should come to a complete stop. The fact it kept the water valve open with the door open is a serious fault- so I would have it checked before using it again.

Most machines have a water-stop feature - so if it develops a leak - it will shut off the water. This clearly didn't happen.

Aug 05, 2009 | Bosch SHU3036UC Dishwasher

1 Answer

Started a new load of wash and water never shut off flooding room


you can check for a broken/cracked/ dettached plastic hose leading from the back left side of tub to the pressure switch under the main console. usuall problem is it dry rots and cracks, or comes loose after shaking/vibrating,

Nov 15, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Whirlpool dishwasher will not fill with water


turn the valves to the left if there the screw in type or parraell if the quick open type the first thing a dishwasher does when you start it is drain for a few minutes then stops then fills with hot water run the water as hot at the sink as you can before starting the washer there is a float in the tub that can shut the water valve off if its not seated on the safety switch after the drain at the start of cycles stops then you should hear the water valve open and start the fill let me know and we will go from there

Mar 27, 2008 | Frigidaire 24 in. FDB126RB Built-in...

3 Answers

Washer continues to fill after full, then spills all over floor until manual shut off


This is an indication of a pressure switch malfunction. Post back with your washer brand name and model number and I can tell you how to check it.

Feb 23, 2008 | Washing Machines

1 Answer

Bosch WFX Excel


You have to replace the water inlet valve, the valve where water enters your machine.

Jan 22, 2008 | Bosch Exxcel WFX 2467 Front Load Washer

1 Answer

Neptune MAH3000AWW will start to fill when start is pressed, but stops seconds later


either a faulty pressure switch / pot or faulty controller - either way you will need to call someone in.

Jul 24, 2007 | Maytag Neptune Washer

Not finding what you are looking for?
Kenmore 43042 Front Load Washer Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Jim Chinnery
Jim Chinnery

Level 1 Expert

10 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...