We have a Whirlpool Quiet Partner II that was being noisy and then it stopped washing the dishes. We took it apart and found a nutshell in it but now it is still not going through the wash cycle. We have noticed when we start the dishwasher on a normal wash cycle that the LED light for sensing doesnt light up. Does that have anything to do with the dishwasher not washing?
When started it goes right to washing and then fills up with water and stops. It is model number DU1015.
I have a whirlpool quiet partner II and for some reason it does not drain the water out any more and I cannot figure out why....people say that it is the filter but that is unbelievably hard to get to and I cannot find any instructions online or paper work that tells how to break it down. If anyone has any insight please let me know
2,912 views
Usually answered in minutes!
Had same problem about 1 1/2 yrs ago. Repairman said was sensor so we had it replaced. Now same thing has occurred again. This was preceded by a noisy machine a week or so before it stopped washing. I can get a fault code of D3-05-16 but cant find anywhere that tells me how to repair.
You can check you machine to get a fault code by touching these buttons:
Heated dry, then Normal, then Heated dry, then Normal again. A code will flash in 3 sets of double digits. The first set may have letter and/or number. My code is D3 05 16.
I would like to know what this means so I can be sure the repairman is ripping me off or if I need to just buy another dishwasher since this is the 2nd time in a short period this has occurred and the dishwasher was just bought 5/18/06.
I wish I could help, but I too have a similar problem with my Whirlpool Quiet Partner II. I dropped some pistachio shells inside the machine, and can't get down to the food grinder. It would be helpful if anyone with previous experience can chime in with some assistance.
I get a E:02 message at end of wash cycle. Dry cycle does not seem to get hot.
×