I was given a mighty mender ww100 its missing the power cord and presser foot where can i get on please

To use the White Mighty Mender W100 Mini Sewing Machine, follow these steps:

1. Place the machine on a flat, stable surface.
2. Plug in the machine and turn it on.
3. Thread the machine by following the threading guide provided in the manual. Make sure to use the correct thread and needle for your project.
4. Place your fabric under the presser foot and lower the foot to hold the fabric in place.
5. Use the handwheel to lower the needle into the fabric at the starting point.
6. Press the foot pedal or use the start button to begin sewing.
7. Guide the fabric through the machine while sewing, keeping a steady pace.
8. When you reach the end of your seam, use the reverse lever (if available) to backstitch and secure the stitches.
9. Lift the presser foot and trim the thread.

For more detailed instructions, refer to the user manual that came with your Mighty Mender W100 Mini Sewing Machine. If you don't have the manual, you may be able to find one online by searching for "White Mighty Mender W100 manual" or contacting the manufacturer directly.

check with sewvacdoctor.com or A1sewingmachines.com and see if they have the part or even ebay

yes, the feed dogs are what moves the fabric thru the machine

They have a free instruction manual download on singer website
On the homepage at the bottom look for instruction manual & click on it
It will take you to a page where there's a box put in the model number WW100
Then click search

Hi
You can download this manual from the Singer site.
http://www.singerco.com/accessories/manuals.html
Just type in ww100 and click on search.
On the next page click on free download!
Hope this helps!

There's one available on the Singer site.
http://www.singerco.com/accessories/manuals.html
Just type in WW100 and cklick on search.
On the next page, click on free download!
Hope this helps!

I can help you with the manual part.
A free to download manula is available on the Singer website.
http://www.singerco.com/accessories/manuals.html
Just type in W100 and click on search.
On the next page click on free download!
The model number changes to WW100 but it is definately the correct manual for the Mighty Mender!
Sorry I can't help with the other things, I only know about finding manuals!
Although you could try the Singer site and see if they have any for your machine.
http://parts.singerco.com/

http://www.whitesewing.com/products.asp here is the website for the company which makes your mighty mender. you will see a number there for their customer service rep. give them a call, nothing like getting the answer direct. let me know how you make out.

Well, here's an easy fix. It is either a class 15 or class 66. I would go to a local repair shop with your machine and they can try either of them . They are not real expensive.