Scaleo P drivers utilities cd wanted - Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

Try eBay or any computer store. CD's are standard and universal. Just make sure you get one that has the same interface (IDE or SATA) as you have.

on this page
http://ts.fujitsu.com/support/downloads.html
type scaleo 600 for searh
you will be redirected to drivers download page

on this page
http://ts.fujitsu.com/support/downloads.html
type sclaleo 600 for searh
you will be redirected to drivers download page

According to Fujitsu Service Support, the Scaleo 600 uses a Gigabyte GISXT
mobo. (MOtherBOard)

http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/consumer/MediaCenter/Scaleo%20600/Scaleo%20600.htm

(Actually the Gigabyte GISXT-FS motherboard.
G - 'eye' - SXT)

This is the PDF download, for the Gigabyte GISXT-FS motherboard manual,

http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/Boards/Motherboards/GigaByte/ga-8isxt/Man_8isxt-fs_uk.pdf

step 1: check with the speakers on another computer to ensure the speakers are working fine.

1. Insert the CD-ROM titled 'Fujitsu Technology Solutions Drivers & Utilities CD' that came with the computer into the DVD tray and close it.
2. The Drivers & Utilities CD will start automatically.
3. Click on 'Driver Installation' option.






4. Click on INSTALL.
5. After the installation process the computer will automatically re-start. If not, for safety reasons (to not misinform/corrupt the information on the registry) restart the machine manually (Start Menu - Shut Down).
If you receive a message saying 'Found New Hardware Wizard' during the Drivers installation (Automatic recommended), ignore it and leave the Drivers & Utility CD to finish the installation. The D+U Setup is will detect the computer's hardware (it will not detect the drivers of any external devices you may have) and install the drivers needed. After you re-boot the machine you may get the Found New Hardware Wizard again, this will be your Monitor being detected, follow the on-screen instructions to install it properly (if you have a driver's disk, provided with your monitor or any other external device that you have connected, use this when prompted)

go to device manager by typing in start search device manager. under network adaptors right click on the network device you want to uninstall. click uninstall.

The German download page is found here
Fill in the field: Bitte geben Sie die Serien-/Identnummer des Gerätes oder den Produktnamen ein: "Scaleo 600"
Then open Audio, look up in the manual of your Scaleo 600 wich audio
chipset your motherboard has onboard to download the the correct drivers.

Note: Use the Fiujitsu Siemens site with Internet Explorer because it does not work very well with Firefox and next time putt your question here in English, you'll get more help in this way.

Succes.

you can download it from here http://www.bioticaindia.com/scaleo-600.html instal it and check in device manager if is properly instaled(working).

Visit http://support.ts.fujitsu.com/com/support/manuals.html
Make sure you have your serial number ready to view the manual. Hope this helps

www.mcmsacto.com

Hi EsteG, found all your drivers for your SCALEO 800, these are also used for the SCALEO 800Si 2410 Silent+. They call it the 800 series, for XP. Click the link below.
http://support.fujitsu-siemens.com/com/support/downloads.html

Because it's the whole 800 series you'll need your manual to pick the correct Audio driver as noted in your manual. To narrow down the ammount of drivers in each area. There should be a sticker on the PC that has the serial No# . Enter that number on this link below. (Siemens Fujitsu) does not make this easy.
http://support.fujitsu-siemens.com/com/support/downloads.html

If I can be of more service, just ask.
Good Luck & Kind Regards.

Mike