Whirlpool Duet Error Code F11

Error code F11 = Serial Communication Error. Error codes can be caused by a Power Surge or other electrical anomaly,attempt to return the washer to operation by following the Hard Reset procedure below.Aug 25, 2009

give it a try - worth unplugging and plugging back in.

if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

Display shows an error code - Front-load washer ' Whirlpool ...

https://www.whirlpool.com/...error-code...w...
Whirlpool Home AppliancesCheck the following answers for error-code related issues you can correct: ... Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33.

What does error code f23 flashing mean on a Whirlpool ...

After years of suffering from random F11 that became a permanent F11, I did the repair as in the video and all is good for 2 years. No more F11. About one load a day (we have kids!)

hello,

the error F11 is an error code indication of a water temperature sensor error. There is a chance that there is a loose wire connection on the water temperature or over flowing of water from the drum Gage.

what you are to do to fix up this problem of error is to unscrew (open )the washer trace the wire down to the sensor fix up the loose wire back to is position then clean up all forms of water you can see around the wire and the sensor (screen)please while doing this all form of power supply should be OFF , do not apply water or any form of liquid when cleaning the wire and also the sensor .

thank you and thanks for using fixa.

F11 is:
Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.
Check for:
Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
Check the Drive system for any worn or failed components
Check MCU
Check CCU
Check Motor
Check Wire Harness

http://www.fixya.com/support/r666194-f11_error_whirpool_duet_kenmore_elite

Check the above link for a detailed article about the f11 error code.
Courtesy:JSrock

F11 is:
Serial Communication Error
Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.

Check for:
Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
Check the Drive system for any worn or failed components
Check MCU
Check CCU
Check Motor
Check Wire Harness

http://www.fixya.com/support/r666194-f11_error_whirpool_duet_kenmore_elite

Check the above link for a detailed article about the f11 error code.

Courtesy:JSrock

Not sure what machine you have?

F11 Error Code for Whirlpool Duet & Duet HT :

F11 is Serial Communication Error, communication between the central control and the motor control unit cannot be sent correctly.

Check all connectors at the motor control and the Main control, check the motor, check drive system for any worn or failed components.

This is the only F11 Error code I could find for a washer.

f11 Serial Communication Error

Communication between the Central Control Unit (CCU) and the Motor
Control Unit (MCU) cannot be sent correctly.


* Check Wire Harness connectors to the MCU, the motor, and Central
Control Unit (CCU)
* Check the Drive system for any worn or failed components
* Check MCU
* Check CCU
* Check Motor
* Check Wire Harness

F-11 is communication error between the Motor control unit and the Main CCU. Either of these or both could be bad. Sometimes unplugging all the connections from the CCU (under top panel) and plugging them back in will fix the problem. If fixed, there's a bad connection at the CCU.