Machine Error 41

error 41 is a critical error with the print head of your machine, you can try unplugging it for a while then plugging it back in but if that doesn't work it will probably need a new head. If the power cycle doesn't work I would suggest buying a new machine

Check the following information.......
http://www.fixya.com/support/t5426307-brother_intellifax_3320cn_error_code_41

I AM TAKING CARE OF THE PROBLEM BY TAKING MY MACHINE TO SOMEONE THAT KNOWS WHAT THEY ARE DOING, YOUR PROGRAM IS TOO CONFUSING.

unplug all the connections and reconnect everything back.also checkout for any blocked paper or any paper jam.also remove and check out the cartridges from the printer and reinsert.either its the internal circuit failure error and has to be repaired to make it proper. thanks.

This is the only reference I could find on error 41: How can I clear the message Machine Error 41 from the display? (ME41)


Machine Error 41 indicates a mechanical malfunction of the Brother
machine. Unplug the unit from the power source and then plug it back
in.

If the error message continues to be displayed on the LCD, please call
Brother Customer Service at 1-800-284-4329 for assistance. The Customer
Service center is open Monday through Friday, from 9:00AM to 7:00PM,
excluding holidays If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi,
When did the problem start on the printer


Thanks
proton

what you want to do is unplug for a couple of minutes while checking to make sure there is paper jammed anywhere in the machine, remove all your paper from supply as well. then time how long it take to warm up or the error code comes up.

mikey

print head defective. cant be fixed anymore.
You need a new fax machine due to the fact that the spare part is more costly than  a new one!

How do you fix the error 41 that keeps showing up

Hi,
Can you verify the error message to be 70? Error Codes for the 4100 starts at 71 as shown in the link below.
http://tinyurl.com/yvcv35

It could be error 7D. You may try to remove the toner cartridge from the printer and slide the corona wire cleaner and put it back on. Do this with your fingers crossed. :-)
Error messages like these are not user serviceable. Another bet is to unplug the unit, wait a couple of minutes and plug it back again. If the error persists, professional service is required.

Best Regards