Lost cradle for Casio Exilim (6.0 Mega Pixels digital camera EX - S600) Can't re-charge or convert photo's from camera to computer anymore.

EX-Z1000
I want to turn off the flash, how do I do it?

Hi there,
Base on User's Guide of Casio Exilim EX-S600 Digital Camera, Flashing red light when charging the battery is mean "charge error"
(see the picture)

to overcome some problems that may occur, please refer to the User's Guide of Casio Exilim EX-S600 Digital Camera which can be read here:
http://support.casio.com/pdf/001/EXS600_e.pdf

good luck :)

http://cgi.ebay.com/GENUINE-CASIO-EX-Z60-EX-Z70-EX-S600-EX-Z850-AV-Cable_W0QQitemZ160326461860QQcmdZViewItemQQptZDigital_Cameras?hash=item255433a9a4
from here u can purchase it online ...

Battery restoration is required

Why don't you just transfer them onto your memory card? If your computer has an SD slot that would work. In your play mode you would just press menu and then copy to card. Otherwise you are going to have to wait until you get back to your dock with your camera.

Take out the battery and memory card, then reinstall them.

Good day on you sir , you have same problem about my friend of mine,, Who have also Exillim S600..
Two Problem you may encounter for that 1st is you need to change battery for that and the 2nd if it not function after you change battery its mean that theres a problem to your current supply need to change repair it into the licence repair man , you may not be worry for the fees coz its only affordable and easy to repair you must avoid those who repair shop that needs you large amount of fees..

Visit this link for the manual. Click this link for Frequently Asked Questions?

You have two options for downloading pictures.

1. Use a SD card reader, fast download.
2. Use the camera and the USB Cradle (Page 180-187 of your owner's manual) There are many more steps than can be described here. The overview is:
1. Plug power to the cradle
2. Connect the cradle to the computer using the USB cord
3. Mount the camera in the cradle
4. View and copy the images from the camera using your favorite software. Perhaps Picasa2 from Google.
   

The battery model is NP-20 and the charger for this is "the special BC-10L Battery Charger" and can be purchased here, or the casio model from here.

Mine does something similar to this and I take it off the cradle, take out the battery, put the battery back in, and then place the camera back on the cradle. Hope this helps.

here's you go http://world.casio.com/qv/download/en/