Focus my picures are all blury, how do you focus the camera?

HI there your screen is ok but sorry to say that the lens does not focus because the lens guide pin is damaged or dislocated. So replaced the guide pin or repaired it. After that your camera will work properly. Thanks & waiting for your feedback.

Hi there its a problem of your lens. The lens guide pin is damaged or dislocate. Thats why the lens can not able to focus properly. Replace the guide pin. Thanks.

Hi,

What you can do is go to webcam options and check what is the resolution is set to, depending on that you can change it to the best resolution ( preferrabley 640x800).

Regards

there is probably a focus ring around the camera somewhere mine has try to find it if there is one and twist it until the picture is right.

sticking focus the lines arte causes by it trying to focus

When operating any digital camera, the camera tries to capture the best focus and exposure for that particular scene. By pressing the shutter button half-way down, the focus and exposure is being set. There will be a green circle on the upper left hand corner of the screen, then your camera is ready to take the picture. Slowly depress the shutter the rest of the way down to take the picture.

Its an error code and shows problem of Lens mechanism.
Lens focus / zoom motor is stuck that's why camera gives out of focus image.
You need to replace Lens Assembly and it would cost you more then camera worth.

Ja, I'm also having this problem!

Hello,

I have a Sanyo VPC-S3 camera old now I know, but my main problem is with focusing, all the pictures come out very blury, you cant easily tell what the subject is.

I have tried all the setting Both Manyal, and full auto, and the focus does not seam to make any differance noi matter what I do.

Please help.

All the best.
mothergoose

It sounds like your lens's focus element is stuck. Given the events you describe it is possible that a grain of sand has worked its way into the focus motor's gearing and jammed it up. Normally the small motor moves the focus optic in and out to achieve proper focus, if its movement is limited or completely jammed you will experience blurry pictures. The camera will have to be disassembled and the sand cleaned out to restore normal function. There are repair providers you can find online who can work on your camera. David Millier Advance Camera Repair