Oh bad luck....its out nothing you can do. time to buy a new one. I bought a new panasonic inverter.
My kenmore microwave #665-61627100 has no power I change the fuse but still nothing.
The door switches are designed to prevent the unit from running while the door is open. You probably have a blown fuse, and it's a white or dark grey ceramic fuse of 15A or 20A, available from local big box stores or appliance parts stores. The fuse is usually located on the floor of the chassis behind the control panel, or mounted in the same area as the door switches. Also, I'm really curious how the door switch got stuck while cleaning? That sounds scary...
Usually this is a problem with the door switches or a broken door switch mount.
Sometimes after a part replacement one will find a couple of wires have been reversed.
There should be a mini-manual with wiring diagram inside the oven behind the control panel.
If those are all correct, you may have a problem with the control panel, which we repair nationwide for $39.95.
If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info (as well as a text file which helps in diagnosing and repairing door switch problems) at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk
681 views
Usually answered in minutes!
Same problem. When I flipped the door switch back to the original position, the display went out and now there is no power.
My problem is pretty much the same....but It didn not completely work....just stopped. Its a Samsung M1935NCE 1000w. Say If the fuse blew up how do you change it? Sorry I don't know about these stuff.
×