Phone set on do not disturb can not undo

If you have an iphone, you have your setting set to "do not disturb" which will silence calls automatically which is a great feature for times when you are in a meeting or even a movie theater.
I'm assuming you have an iphone which is the most common phone and easiest to accidentally turn this mode on. If so, go into your settings and underneath the "notifications" and "control center" tab, you will see "Do Not Disturb". Switch off the "manual" tab as well as "scheduled" if that setting is on. Now, your phone should ring like normal.
Hope this helped!

lost the operators guide in the glove box,?
its free a jeep
or online do a search , find it , and read it.

Feature #85

The # command is used to undo some commands.


Carl

Feature # 8 5 Do Not Disturb Off

Feature 85 puts do not disturb on the phone and feature # (pound) takes it off

The do not disturb feature (DND) allows you to mute the ringer, the base, and any registered handsets at the same time. The phone must be in standby mode. Press and hold do not disturb on the base. You will hear a confirmation tone, and the DND LED illuminates. To cancel the DND feature, press do not disturb again. You can also mute the ringer tone while the phone is ringing by pressing do not disturb on the base.
Activating the DND while the answering system is off will turn the answering system on automatically. The answering system setting will reset to the original setting when you cancel the DND.
If you press answer on/off when the DND and the answering system is on, both of the DND and the answering system will turn off.
To mute the ringer tone temporarily for each handset or the base, when the phone is ringing, press the MUTE soft key on the handset or the base. The ringer tone will return to the previous setting starting with the next incoming call.

There is a button on the main base that says " Do not disturb" my 4 year old son must have pushed it. It was an easy solution.
Thank you!

On the base unit, press the "Do Not Disturb" button. This button is located on the front right corner of the base unit. The button light should turn off indicating that the DND feature is deactivated.

For GE 6.0: There is a button on the base lower right corner  (NOT the phone), you need to press it once again to turn off Do Not Disturb

For GE 5.8 GHz: 1. Pick up the phone handset and dial *98.
2. Press 2 to disable Do Not Disturb.
3. Once you hear the confirmation that Do Not Disturb has been disabled, you may hang up the phone handset.
Hope this helps!

You can try the below steps in order to turn off Do Not Disturb. For GE 6.0: There is a button on the base lower right corner  (NOT the phone), you need to press it once again to turn off Do Not Disturb

For GE 5.8 GHz: 1. Pick up the phone handset and dial *98.
2. Press 2 to disable Do Not Disturb.
3. Once you hear the confirmation that Do Not Disturb has been disabled, you may hang up the phone handset.