Dlink wireless router, shows up, can't connect

change the password with a new one (not the default), then change the ssid with a new one (not the default). then reconnect

Did you enter the security key (password)? It may be your laptop? Try resetting the D-Link to default settings and connecting to the laptop. They reconfigure the SSID and Security Key. Write down the info for future use. Here's a user Manual: http://www.dlink.com/uk/en/home-solutions/connect/routers/dir-600-wireless-n-150-home-router

This is a common problem with this router. Try to update the firmware from dlink.com and reboot the router after the update. Also the range is not great with this router, so you may have problems if you're only in the next room. The only solution with this model - short of getting a different router is to restart the router when there's no wireless connection - sometimes multiple times (turn off for 1 minute, then turn it on again). Besides that there's not much you can do - it's just not a good product.

Hi,
To reconfigure your router you need to first reset it to factory defaults you need to press the reset button for 30 sec when the power is on at router
i am attaching a screenshot for your reference
after that you need to connect the router with a cable to your pc and open the router setup page as per below instrutions

http://www.openports.info/routermanuals/dlink/pdf/Dlink524_manual.pdf Please follow this link as it has the manual for your router which will give you easy steps of configuration

let me know if this will help

HI! to secure the dlink wireless network, u need to access the setup page of the router, pull up a browser and type in at the url:192.168.0.1 and it will ask the username and password, by default the username is admin and password, just leave it blank and it will show the setup page, on the left side select on wireless settings and manual settings, you can select any option here on what type of security u will set. once setting is done u have to save the settings.. once done u have to connect ur wireless computer to the secured wireless network that u create it will ask the password and connect

is wii showing available network?call dlink they should be able to help!!! :)

Your wireless card is dead, replace.

You don't need a disk to set your router
You can get help here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx

Then do this:

Setting wireless network on Win XP
Click your Start Button
Select and click Control Panel
Select Network Connections
Select Wireless Network Connections
Right click
Select View Available Wireless Networks
5. Highlight the network you want to connect to
Click Advanced
6. Select the wireless network tab
7. Highlight the network in the available networks window
9. Click configure
9. IN the Properties Window
Double check the SSID (network name)
Enter the WEP KEY provided to you by the office
Click OK

You need to go into the wireless driver advanced properties and set the SSID, WEP Key, channel and others. Wherever there is an 'auto' option, choose it.

I never got the dlink utility to work. I let windows manage it and change the device settings in advanced props.

Nagu

visible & unavailable means that the wireless security settings are not the same on the recently formatted computer, as on the rest of the network.
Open the wireless configuration for any computer that can connect to the network and copy the security settings (wep or higher) to the unconnecting pc
OR
connect to the router by cable from the non-connecting pc, use the web interface at http://192.168.0.1 to read the security settings, and copy the settings to the unconnecting pc

then it will connect