I've washed some jewellery in washing machine!!

John, if you post your question under "washing machines", you will likely get answers for washing machines. If your question isn't about washing machines, you should not post it under the "washing machines" topic.

Hi Karen. Problem may be the internal "tap" that operates electrically. First test - If you are trying for a cold wash, try a hot wash. If maching begins to fill you know this tap is your problem. There are 3 solutions if this is the case
1) swap hot and cold water hoses at the tap and tell machine to do a hot wash - only good if you only want cold washes
2) check where hoses connect to machine at rear - sometimes a fine mesh filter that has become clogged - may be at either end.
3) Replace the internal "tap"(solinoid). This "tap" has a rubber diaphram inside that may become stuck if the machine has not been used for a while. it can be easily dismantled and reasembled by a handyman.

Hi Sophia.
you could try this link and you might find something to help you out.
How to retrieve my ring from the washing machine Google Search

The clue is in the water temp. light flashing. DF means that the temperature sensor is faulty. Replace it with a new one. Turn power off at wall. Remove the 3 screws & open panel. Sensor is plugged onto control board near the middle top of board & goes down into the base of the control panel at the middle where the water enters the machine. Unplug from the board taking care not to damage the pins on the board. Replace the new one making sure the o-ring is on it. Close up panel & turn power back on.

need to replace the rubber ,the one who moves the motor under the bolt

take the tub apart and then you going to find much more mildew let me know after

it shouldnt take much to get it out.call them in and have them pull it out so it cant do any other damage to the machine

I've found that a similar thing on my Zanussi appears when the filter on the output is clogged. Removing muck and hair from the filter usually solves the problem

order on line it should be easy to get one

the only way to fit door rubber to tub on a zanussi is to use washing up liquid it takes two mins