My belkin router wont light up? - Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

Mine has this problem also. Apparently this is related to the voltage circuit. If someone has the schematics or the solution please tell us.

Your Router Should Be Configured for your Internet Service Provider. To do that you have to contact your Belkin technical support & they will give you a hand. Or Please update some Details about your Internet connection who is your Internet Service Provider. What type of Internet Connection are you using is it DSL or Cable. And i will walk through the Steps For you... :)

reset it and then load the belkin cd before you hookup the router to the system and then when it tells you too then hook up the router,make sure to revert back to the way it was hooked up before you got the router

You will need to configure the router manually

Tell me the name of your internet service Provider ??

* try connecting ur belkin router to different power socket * try with different power adapter * or else press the reset key for more than 1 min while holding the reset unplug the router power cable and plug it back again 3 times.--- while holding the reset u shouldnt release the reset while u unplug and replug. the interval between each unplug and replug should be 15 seconds. * then release the reset then unplug the power cable and plug it back * it has to work or else replace it with the belkin tech support

your user name and password have been entered incorrectly, they are case sensitive and must be exact. Make sure your ADSL settings are set at 0/38 (you'll see where)

yes always best to use ethernet when you can.richardm69

Yes its already a dead router and needs a replacement already since the light wont even stay on when its plug in to a power supply...

If you have left your router open, you may have been hacked.
Ring Belkin support to make your router more secure