Have a Clarion vz401 stereo system. changed battrey in the car and my son entered the wrong password 3 times and the whole system locked up. Does anyone know how to reset it so that it will function again? Thanks
Disconnect the battery and wait about an hour, reconnect battery and try again. If this does not work take it to the dealer.
SOURCE: multiregional code for clarion ohm107vd
Press 9653 on the remote then press 0 when asked for region
SOURCE: clarion vrx485vd wont play videos from iphone when connected
You need a composite video cable to the Clarion Video input. The usual ipod adapter is for audio only. If you have an AV ipod adapter and you still don't have video, the signal is not strong enough for the clarion to see it and you need a 12volt pre amp. you can find them online starting around 25. Hope this helps
SOURCE: My clarion nx409 has frozen on the clarion screen
Did you try re-setting the tape. Its reset switch is located right to AUX-IN pin.
8,844 views
Usually answered in minutes!
I have THE EXACT SAME PROBLEM! There's no way to unlock it. And apparently Clarion is the only one who can bypass the password setting. And they want around $200.00 to fix it. You'll have to remove the stereo, send it to them & pay for shipping-both times!
I think the only thing you can do, is disconnect the battery, and try to do the password again (If it'll let you)
Good luck! I'm in the same boat :(
VX401 ASX: 4356 Funcionou.
Yeah guy it worked for me switch
off the the set hold Down volume minus while holding put it on code will appear once more input 4356 it worked for also clorion vx401 thanks
Thanks ! That was so easy. 4356
×