Remote control code for 32'' ELEMENT tv to work with TIVO Ser2

Element 32 in tv - Fixya

www.fixya.com > Forum > Flat Panel Televisions > Element

38 mins ago - element 32 in tv Need a code to run the volume and on off shaw direct sat. - Element Flat Panel Televisions question.

Remote Control Code for Element LCD TV -- & Direct ... - Fixya

www.fixya.com/support/t1101060-remote_control_code_element_lcd_tv

Remote Control Code for Element LCD TV -- & Direct TV Haven't been able to find the right code to program the - Olevia LT32HVM 32 in. ... It is annoying to turn the TV on and the volume with the Element remote and then have to use the ..... Need the codefor a 42 inch LCD TV model ELDTW422 to program our Direct TV ...

Element 32" 1080p TV (ELDFW322): Unboxing & Setup ...

? 6:40
https://www.youtube.com/watch?v=EKtjBnx6EG0
Mar 27, 2013 - Uploaded by PureLegit
This is a new video on this TV that I got from Element. If you go back on my channel you will see my first ...

Hi- My name is Shannon and I am with Suddenlink. The SL-TiVo remote can be programmed to control the TV and one other A/V device using these steps:

1) From TiVo Central, select Settings & Messages > Settings > Remote, CableCARD, & Devices > Remote Control.

2) Highlight Part 1: TV power, volume, and mute and press SELECT.

3) The DVR displays a list of television brands. Use the UP ARROW and DOWN ARROW buttons and the CHAN DOWN and CHAN UP buttons on the TiVo remote to highlight your TV brand and then press SELECT.

4) The TV Remote Codes screen appears. Follow the instructions on this screen to enter a code into your remote control. If the first code does not work, repeat the instructions to enter the second remote control code, and so forth, until you find a code that works. The remote is now programmed to operate the TV.

5) If also programming to control volume & mute on an A/V receiver for surround sound; Highlight Part 2: A/V volume and mute and press SELECT.

6) The DVR displays a list of audio/video receiver brands. Use the UP ARROW and DOWN ARROW buttons and the CHAN DOWN and CHAN UP buttons on the TiVo remote to highlight your receiver brand and then press SELECT.

7) The AV Remote Codes screen appears.

Follow the instructions on this screen to enter a code into your remote control. If the first code does not work, repeat the instructions to enter the second remote control code, and so forth, until you find a code that works. The remote is now programmed to operate the receiver.

The TiVo remote will now turn the TV on/off and switch inputs and adjust the volume and mute the audio on the receiver.

If you have any questions, feel free to email me at shannon-AT-suddenlink-DOT-com. Thanks!

you can key in your units and get the most likely codes at
http://www.directv.com/DTVAPP/global/contentPageIF.jsp?assetId=P4380036#h:620.480

I read another post where they added 1 to make the code 5 digits. Use 01331 and try it, it worked on my Directv Tivo remote and Proscan 32".

1. Cover the end of the TiVo remote control with your hand.
2. Hold down the TiVo and TV POWER buttons simultaneously until the red light on the remote control remains on.
3. Remove your hand from the end of the TiVo remote control.
4. Enter code 0999.

After you enter the code, the red light will flash three times and then remain on.

1. Press CHANNEL UP once every two seconds. This will test hundreds of codes, one by one.

IMPORTANT: Do not go any faster than this or you may skip over a code that works.

1. If you press CHANNEL UP and your TV turns off, press ENTER to select the code. Press the TV POWER button to test the code. If your TV turns on, you have successfully programmed the remote

There are different codes depending on whether the Tivo was set to respond as a specific device (1 or 2) on the remote or by standard default (device 0). Also, typically each universal remote has its own code for each device, which is specific to the remote, not the device you wish to control. For the $20.00, it might not be a bad thing to simply buy a new universal remote that is capable of controlling a PVR (There are many good ones out there).

As I understand it, Polaroid TV's sometimes work with the Mitsubishi codes. You may give this a try. You may also e-mail Polaroid direct at www.polaroidelectronics.com contact page to find out what codes should be used (may match a different manufacturer)

tivo button is the Directv button (tivo home) at the top of the remote. if u have the new directv remote, the tivo home button is the menu button. remote needs to be on satellite. to program codes.

If it were a Tivo series 3 you might have better luck with it.

http://www.tivo.com/setupandsupport/technicalsupport/compatibilityhelp/Using_the_Learning_Feature_of_the_TiVo_Glo_or_Series3_Remote.html

I've had my series 2 Tivo for about 2 1/2 years and never found the correct codes for it. I think it works off of a list of TVs manufactures about 3 years ago.

Try this: On the Tivo remote press and hold the TV Power button and the Directv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).