Need to buy speaker wires for Sony dav-hdx275 system

Well yeah, the DVD is internal so it can't possibly send an incorrect signal or be wired incorrectly.

What 'different' device are we talking about? It must be digital and transmitting a proper multichannel bitstream.

http://www.retrevo.com/support/Sony-DAV-HDX275-Home-Theater-Systems-manual/id/13756ag212/t/2/

See page 96.

Hi,
Is it Sony DAV-HDX275 home theater or any other model? Let me know, I might help you to fix it.
Thanks.

The code for the 6.3 ir/uhf pro remote when set to uhf is 794. Fist hold down aux until all lights blink then press 2 then enter 794 and press #.

best i can do is refer you to sony.
http://esupport.sony.com/US/perl/model-tutorials.pl?mdl=DAVHDX275&LOC=3

Please check speaker wires should be properly connected and not touched / shorted.
Push Power Protect is error sign when unit got problem in Power Amp area and mostly its Power Amp Out IC failure.
I would suggest to ask Sony for warranty cover.

The fiber optic port on back on your bravia tv is only for when your using a over the air antenna and watching local atsc channels in your local market. You need to run the fiber optic from your hd cablebox if it has one or your hd sat box if it has one. If you don't have a set top box with the fiberoptic port on it you can use a digital coax cable from the cable or sat box to sound system. The only other way to get sound if you don't have a cable or sat box is to run the red and white rca audio cable from the tv to the sound system and got to the audio setup on tv and turn the tv speakers off and you might have to adjust the audio to fixed instead of variable.

I’m happy to help further over the phone at https://www.6ya.com/expert/brandon_60dfebff379d64bd

It's likely the sound settings on one or more of your items are not set right or switched off.

Amigo conseguiste resposta para trocar a regiao do home theather de 1 para 4? No aguardo, [email protected]

Region Free DVD can be playback on all Sony DVD Players.

Here are a couple of the most common reasons for your problem:

Make sure you have selected the right input source on the DAV-HDX275 that your TV station source (cable, satellite, direct TV or whatever you get TV stations from) is connected to on the DAV-HDX275.

Also make sure that if you are using a digital input (HDMI, optical, or coaxial) from the TV station source, that the DAV-HDX275 in set for a digital input and on the right source.

If you are using an analog source (red and white RCA jacks) for the TV stations , make sure you do not have the digital input activated for that source on the DAV-HD275. You need to select the analog option.

You must also be sure that you have a cable, whether it is analog or digital, connected from the cable box to the DAV-HD275.

I hope this was helpful to you, it is always very important to double check all the connections and make sure the stereo is set to the right type of input (digital or analog).

If you have found this to be helpful, a good rating is always appreciated. Thanks and let me know if you need any more help.