Cuisinart coffee maker won't brew

To reset your Cuisinart coffee maker, start by unplugging it and then plugging it back in. Next, press and hold the button for three seconds. After that, press the button again and hold it for three seconds. Finally, press the button one more time and hold it for three seconds.

My Cuisinart Grind AND bREW IS LEAKING WATER AFTER IS HAS BREWED

Hello FloydBob, The Cuisinart DCC-1200 has the ability to program the auto-off function that keeps your coffee warmer plate on after brewing is complete.

The unit lets you select the time increments from zero up to 4 hours.

See page 6 of the attached manual for the full instructions for reprogramming the coffee maker.

To program the Variable Auto Off:
1. Turn the FUNCTION KNOB to the “Auto Off”
position. Press and hold the “Hour” button
for 2 seconds. The clock display will start
blinking.
2. Program the coffeemaker to shut off from
zero to four hours after brew cycle is
finished by using the “Hour” and “Minute”
push-buttons.

I figured you might also like to have a complete instruction/owners manual so you can have access for any other questions you might have about your coffee maker, in the future.

http://www.cuisinart.com/share/pdf/manuals/dcc-1200.pdf

I hope you find this Very Helpful and best regards!

Unplug the coffeemaker for 20 minutes or longer - not a second less - in order to fully reset it. Then, when you plug it back in, turn the function dial to Clock again. Press and hold the HR button for a few seconds, and then set the hours. It should work now unless it got zapped, as you said.

Good luck!

-Tha Mp3 Doctor

Reset the timer for shutting off the hot plate, instructions are in the user manual.

Turn the function knob to Auto Off
Hold down the hour button til you see the clock display blinking
you can then use the Hour and Minute buttons to program how long you want the coffee maker to stay on.
You can choose from 0 minutes (seems to be what you have it set on now) to 4 hours.

what exactly is it doing or not doing ??? any lights come on when you attempt to use it. chances are it just needs to be reset (unplug it for about ten minutes then plug it back in).

Robert

I have a cuisinart model dgb-600bc coffee grind & brew, didn't have a manual with it when purchased, plugged in it & hit the on button, lights up when pushing in on it, but let it go & it stops, but doesn't brew nothing. HELP -

the touch panel seems to have gone faulty.

To program the Variable Auto Off: 1. Turn the FUNCTION KNOB to the ?Auto Off? position. Press and hold the ?Hour? button for 2 seconds. The clock display will start blinking. 2. Program the coffeemaker to shut off from zero to four hours after brew cycle is finished by using the ?Hour? and ?Minute? push-buttons. (see ?To set the time?)