Powerrite Plus beeping

Sounds like a computer malfunction. The manual does not mention beeping in the trouble shooting section.
Try unplugging the machine for a minute. This may reset the computer.

you can download the user manual on their website.

Most cities have local recycling centers where you can drop off paper, plastic, etc. They usually have something set up for electrical components like VCRs and batteries. The PowerRite Plus was an old Deltec model. Deltec was acquired a few times and is now belongs to Eaton. If you are looking for a new UPS, you can participate in the UPSgrade program which includes recycling your old UPS: eaton.com/upsgrade.

My guess it it is trying to get your attention for some reason. While I am not familiar with this brand, the competition brand beeps because of battery failure or impending failure.

Thanks for your interest in FixYa.com

Hello, enter BIOS (by pressing "Delete")and find there restore default. If you drop it you need check inside laptop of connections components. Check Cpu or Ram.

if u need the ups powerboard is damaged.
the repair could be really expensive.

Call Eaton/Powerware and provide the serial number.

this is not from elevating transformer, fuse, batterys. the problem from charger card transitor is fail remove the transitor.

Is it a hissing sound ? If it is a hissing sound and you can smell ionized air (ozone) then there may be some high voltage leaks (corona discharge) in the High voltage supply coming from the flyback transformer. This happens when there is a path to ground because of dirt dust or spider web, or your surrounding is humid.

Hi, if the unit is fairly new, you may want to claim warranty check or replacement. If it has been used for some time, it may be that: 1) the battery is dying, 2) not getting enough charge or 3) too much load. For 1, battery replacement might be required. Care should be taken since this requires opening the enclosure, removing the old battery (might have acid leaks) and replacing with a new one. For 2), any competent techncian could diagnose and repair. For 3) try removing all other loads to the UPS and just run the PC with the monitor and see if the problem still exist. Hope this works for you and please let me know how things trun up. Regards.