Bernette 75 electronic foot control does not work and another one is not available in Nelspruit

The power cord and the foot pedal are sold as one unit here: https://www.sewingpartsonline.com/foot-control-bernette-singer-riccar-white-411646w.aspx . This is the correct part for the U.S. If you are in a different country, you'll need the appropriate cord for your area. The same foot control and cord works for several other sewing machine, including the Bernette 320 and the Huskylock 901.

I hope this helps. A number of White sewing and serger machines were manufactured by Singer. The manual is available here: https://res.cloudinary.com/singer-sewing/image/upload/fl_attachment/Singer-Website-Library/outdated_product/966_sl-234d_234de-x.pdf .

Cindy Wells

If the light on your Bernette 334SD sewing machine is working but the cloth door sensor (also called the foot controller) is not, there are a few things you can try:

1. Check the connection: Make sure the foot controller is properly plugged into the machine. If it is loose or not fully plugged in, it may not work.
2. Check the pedal switch: The pedal switch may be stuck or broken. Try gently pressing on the switch to see if it moves freely. If it is stuck, you may need to take your machine to a repair shop to have it fixed.
3. Check the wiring: The wiring between the foot controller and the machine may be damaged or broken. Carefully inspect the wiring for any signs of damage or wear. If you find any, you may need to replace the foot controller or have it repaired.
4. Contact customer support: If you have tried these steps and your foot controller is still not working, you may need to contact Bernette customer support for further assistance.

About 17,700 results (0.94 seconds) Search Results

Bernette Sewing Machines - BERNINA Support: Machine ...

www.bernina.com/...Manuals/bernette-manuals/Bernette-Sewing-Machin...
Bernette Sewing Machines Within this section are the Bernette series of sewing machine manuals that are no longer ... bernette 50 / 60 / 70 / 75 Manual (7.4 MB).Missing: power

[PDF]Manual - Bernina

www.bernina.com/de/.../BERNINA.../bernette.../Manuals/deco340_EN_...
Congratulations on your decision to buy the bernette Deco 340. By owning .... Insert the power supply plug into the wall outlet and turn the power switch on. 1.

BERNINA Support: Machine and Accessories Finders, and ...

www.bernina.com/en-US/Support-US
Out of Print Manuals. Out of ... BERNINA FAQ - Find answers to frequently asked questions. ... Please note: this service can only address SOFTWARE questions.

[PDF]Manual - Bernina

www.bernina.com/.../BERNINA.../BERNINA.../Manuals/0333017104_2...
You've decided on BERNINA, a reliable choice that will delight you for years to come. For over 100 .... Power cable. · .... control the sewing speed by pressing the foot

THERE ARE MANY AVAILABLE SO YOU CAN ORDER A GENERIC ONE OR ONE THAT IS ESPECIALLY MADE FOR YOUR MACHINE. YOU CAN ALSO LOOK ON EBAY AND FIND THIS TYPE OF EQUIPMENT.

http://www.sewingpartsonline.com/

Any Bernina dealer can order if it is still available

The presser foot is a 2 piece thing, remove the foot, then remove the top bit that the foot attaches to (the shank). Look at the bottom of the shank while pressing the little lever or button on the back of it, you will see how the foot attaches to the shank.

Bring it in for service

I have the same model and my trustworthy repairman tells me they don't make these anymore so there are no repair parts available. Sorry, but you'll probably have to shop for a new iron.

Carolyn

Between 4 - 6 should be the normal setting.

Sometimes threading is a bigger issue - always thread sewing machines with the presser foot up.

When you do this, then tension opens and allows the thread to enter where it can be properly guided to the needle.

If a sewing machine is threaded with the presser foot down, the tension control is closed to the sewing setting and the thread cannot enter as it should resulting in the tension having no control of the flow of the thread to the needle.

I've seen 'em on eBay.