Delayed printing When making copies, they scan at normal speed, but the printing is delayed. This just recently started occuring and it seems as though it is taking longer to print each time. What could be the cause of this?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
scan the OBD2 port yet with a scan tool?
check all fuses.?
no country told and cars are never the same world wide,ever
multi-function display << english
some cars have (newer do ) DPO, or delayed power off
delayed accessories, even the dash on my car is delayed.
you key off and say radio keeps playing, for 10mins or until
door opens (driver)
this works on lots of other things
some cars the delay is programmable by the users.
covered in the users guide, (glovebox) lost that/?
seems the door controls are not talking the the cluster, now.
scan it.
never forget to check fuses and scan it.,
saves $500 in as shop, DIY?
Regarding pick-up error "change paper size"or "incorrect paper size" while copy/print:
These may do the trick:
Point of problem: Paper Pick-Up Assembly Problem: Prevention of incorrect Paper Size Error or Pickup Assmbly Delay Jam (0104) upon Cassette Pick-up
Behaviour of copier: When making a pick-up setting as from the Cassette and starting Copy, "incorrect paper size" error or pick-up delay jam (0104) may occur.
Possible reason: When considerable amount of Paper Lint is attached onto the Vertical Path Roller , the feeding power is undermined and the paper feeding is delayed, resulting in "incorrect paper size" error or "pickup assembly delay" jam.
Servicing work: When the foregoing symptom occurs, be sure to replace the 27T/50T Gear [old type] with the 33T/50T Gear [new type] and the 29T Gear with the new type simultaneously.
Affected machines are:
iR2016J 120V KQW00838 and later iR2020 230V KRS02060 and later iR2016J EUR 230V KQX19105 and later iR2020i 120V SRB03779 and later iR2016J 230V KQY08575 and later iR2020i EUR 230V SRC03634 and later iR2016 EUR 230V KRB61503 and later iR2020i 230V SRE00245 and later iR2016J EUR 230V TXK10815 and later iR2016i 120V SRH01205 and later iR2016 120V KRE05112 and later iR2016i EUR 230V SRJ04494 and later iR2016 230V KRJ07227 and later iR2016i 230V SRL00298 and later iR2020J 230V KRM01592 and later iR2020 EUR 230V KRP16433 and later iR2020 120V KRR07615 and later
This error typically occurs when the "Enable write caching on the disk" feature for your hard disk is turned on.
However,
if the "Enable write caching on the disk" feature is turned off, this
error can occur because the Ultra Direct Memory Access (UDMA) hard disk
controller may be configured in either of the following ways:
You are using a 40-wire connector cable to connect the UDMA drive to the
controller instead of the required 80-wire, 40-pin cable.
The BIOS settings are configured to force faster UDMA modes.
For more information about the delayed write failure, go to the "Delayed Write Failure information" section.
delayed ignition ?? (meaning no spark when first cranking over)
or delayed starting
if delayed spark -electrical problem -check Ignition module and wiring
if delayed starting (spark ok) i'd check is Fuel rest pressure And Fuel pump relay
Does fuel pump cycle when ignition is turned on
meaning engine starts when oil pressure activates pump
Press the [Menu] button on the Control Panel until 'Reports' is displayed on the top line of the Display Screen.
Press the [Left] or [Right] arrow button until one of the following reports is displayed, and then press the [Enter] button to print the report.
Report / List
Description
Phonebook List
This list shows all of the numbers currently stored in the machine's memory as Speed Dial and Group Dial numbers. NOTE: This list can also be printed by pressing the Phonebook button on the Control Panel.
Sent Fax Report
This report shows information on recently sent faxes.
System Data List
This list shows the status of the user-selectable options. This list can be printed to confirm any modifications to settings that have been modified.
Scheduled Job Information
This list shows the documents currently stored for Delayed faxes. The list shows the starting time of the Delayed fax.
Message Confirmation
This report shows the fax number, the number of pages, the elapsed time of the job, the communication mode, and the communication results. You can set up your machine to automatically print the message confirmation report after each fax job.
Junk Fax Number List
This list shows up to 10 fax numbers specified as the junk fax numbers by using the Junk Fax Setup menu. When the Junk Fax Barrier feature is turned on, incoming faxes from those numbers will be blocked. This feature recognizes the last 6 digits of the fax number set as a remote fax machine’s ID.
Multi-communication Report
This report is automatically printed after sending documents from more than one location.
Power Failure Report
This report is automatically printed when power is restored after a power failure, if any data loss occurs due to the power failure.
×