Question about Whirlpool Duet GHW9150P Front Load Washer
The washer seems to be using alot of water during the cycles. it will most of the time finish the wash but leave the cloths soaked. when there is 1 minute reading on the display after it spins out it puts more water in and then shuts down.some times i get a f9 flashing not sure what that means any help would be great
If the Overflow contact on the pressure switch is Closed for more than 60 seconds and Overflow condition will occur. In an Overflow condition, the Door will remain locked, and the Drain Pump will run constantly, even if PAUSE/CANCEL is pressed twice and the Display is cleared. Unplug the unit to service.
Check the drain hose and make sure it is not plugged or inked.
Check Wire Harness connectors to the Drain Pump, Pressure Switch, and Central Control Unit (CCU)
Check/Clean Drain Pump Filter of foreign objects
Check for Drain Pump Failure
Check the Inlet Valve for proper shut off
Check the Pressure switch for proper operation
Posted on Nov 08, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 17, 2013 | Washing Machines
Aug 26, 2011 | GE WPRE6150HWT
Sep 03, 2017 | LG Washing Machines
Aug 27, 2009 | Kenmore Washing Machines
May 28, 2009 | Kenmore HE2 Plus Front Load Washer
Feb 21, 2009 | Maytag Performa PAV2200
Feb 10, 2009 | Washing Machines
Jan 08, 2009 | GE WBSE2090A Top Load Washer
Nov 21, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...
Jan 07, 2008 | Kenmore Elite 45986 Front Load Washer
278 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: