Bunn CWTF 15-APS Coffee Maker Logo

Related Topics:

Betty Pippin Posted on Mar 26, 2012

Cwtf-15 bunn water leaking at top edges

Water leaking at top edges of cwft-15 bunn coffee maker

5 Related Answers

Kelley Hopper

  • 67 Answers
  • Posted on Feb 01, 2008

SOURCE: my bunn coffee maker CWTF-15 21604-0001

It sound like you are either missing the sprayhead or the temperature isn't hot enough. Check first to see if the sprayhead is there. It fits under the brew basket and looks like a little shower head - it's round and has usually five or six little holes in it. If it is missing your coffee will be weak due to the water not being spread across all of the grounds evenly.
The other thing to check is the temperature. Depending upon where you live the water should be between 185F - 200F. If the water is below that temperature the coffee may look like tea.

Ad
EsWorld

Ernest R

  • 1618 Answers
  • Posted on Apr 28, 2009

SOURCE: Bunn CWTF 15 Coffee Maker Overflowing drastically

Have you tried resetting the brew volume(make sure board is not set to lock).
The only other thing I can think of is replacing the timer board, because its not telling the solenoid to stop brewing.

EsWorld

Ernest R

  • 1618 Answers
  • Posted on May 04, 2010

SOURCE: installation of grommet on model cwtf 15 ( 1 lwr/2 upr pf

Which grommet, there are several on the bunn models, but the most commonly replaced one is the one for the P. stat. Remove the top panel there are 2 screws one in front and one in back, then lift the top 2 burners off machine that will give you access to the tank.

Anonymous

  • 189 Answers
  • Posted on May 19, 2010

SOURCE: my bunn coffee maker is leaking water out of the

Please get the model and code date located on the bottom of the brewer. The machine has a 3 year warranty and if it is 3 years old or less, it will be replaced at no cost. If it is older than 3 years old, it will be replaced at a discounted price. Once you have this information please call customer service.

Anonymous

  • 189 Answers
  • Posted on May 19, 2010

SOURCE: Bunn coffee maker leaking from underneath the bottom

Please get the model and the date code from the bottom of the machine and contact customer serivce. Depending on the date code, there might be a seal kit available or the machine can be replaced at no cost if 3 years old or less. If it is over 3 years old and the seal kit isn't available, the machine will be replaced at a reduced price.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Bunn CWTF-DV-3Tisleaking water from the top right corner of my machine,and has just started leaking at the base of where the bottom burner is. Could you please help,as we have no technicians were we...

open the top. there is a trough drain that gets limed up. using a phillips head screwdriver, push through and twist, thereby removing the lime and ensuring proper flow. if water can't get through, it may overflow over the sides of the trough. also look behind the trough to the top of the tank and see if there is any water damage around the seals. if there is, replace the seals
0helpful
1answer
0helpful
1answer

Water is not hot when turn on

check the heat switch in the rear. if it's on, check the thermal fuse in the top right rear of the brewer. it'll be in a now browned tubing. you can get it through bunn (800) 352-BUNN (2866)
0helpful
1answer

Water not coming out of hot water spigot

thermal fuse is blown. it is located in the top, right rear of the machine in what is now browned tubing. you can either bypass the fuse with a jumper, or get a new part through bunn (800) 352-BUNN (2866)
0helpful
1answer

Water leaking from the top

open up the top and check the trough drain for lime. if it is obstructed, the water will overflow. use a screwdriver and poke it through the drain
0helpful
1answer

I need to ship a 3 burner BUNN CWTF 15-3. How do I drain the water out?

You can take the lid off and unscrew the nut that holds the water tray. Then take a 3/8 hose to siphon the water out of the machine.
0helpful
1answer

Bunn CW series slow water flow

delime the sprayhead and the reservoir drain in the top with a deliming spring or a screwdriver
0helpful
1answer

Cwtf is a contant dripping from the dispenser funnel, how do i fix this?

Inlet valve is leaking.Valve is located by removing front access panel.Can be rebuilt using p.n. 1111.0002 repair kit.You can verify by removing top lid and finding water leaking at fill basin tube.
0helpful
1answer

Installation of grommet on model cwtf 15 ( 1 lwr/2 upr pf

Which grommet, there are several on the bunn models, but the most commonly replaced one is the one for the P. stat. Remove the top panel there are 2 screws one in front and one in back, then lift the top 2 burners off machine that will give you access to the tank.
0helpful
1answer

Our Bunn CWTF15 three burner is over filling. What can we do to correct this problem?

There is a timer inside the front panel re-just the timer with an empty coffee pot right up to the top edge with water only.
if not successful let me know and I'll go further with your problem.my email address [email protected]
God Bless have a nice day.
Dickson
Not finding what you are looking for?

281 views

Ask a Question

Usually answered in minutes!

Top Bunn Coffee Makers & Espresso Machines Experts

vince

Level 3 Expert

2530 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...