Have downloaded software, placed cassette in converter, software loads but the usb which is pluggedinto the pc keeps saying its not connected. Tape runs but no recognition on screeen of activity. Casssette plays with usb plugged in so there is power but its not recognising it in cassettemate screen.
SOURCE: ipod nano
switch the hold button on and off, then hold horizontally, and push the menu button and center button at the same time. hold them down untill the ipod restarts and the apple logo apears. If that doesen't work, plug into the newest itunes program, and push restore.
SOURCE: IRIVER PLUS 3 MEDIA TRANSFER SCREEN
My understanding, as a new user, is that IRiver plus 3 only communicates with the player via UMS mode, which is not the default. Windows Explorer and Windows Media Player only communicate through MTP mode. If you change from MTP (the default) to UMS, it will reformat the player and delete all your files.
In other words, do not use iriver plus 3 unless that is the only software that you want to use. Boing back to MTP mode after a sync or download will then delete all THOSE files you just downloaded.
I just say NO to Plus 3.
Good luck.
SOURCE: archos 605 usb connection problem
its possible you could have picked up a virus that is making unauthorized changes to your pc. happened to me. had to reboot pc to original factory settings.
SOURCE: SONY NW-A3000
Bad news - if you tried multiple pc's and it still failed, then your player is done.
Make sure you:
reset the player
upgraded the firmware
used the recovery tool
called Sony to be sure
last ditch effort:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware.
Wizard.
Buh-bye!
-Tha Mp3 Doctor
239 views
Usually answered in minutes!
×