Hp 5550printer is showing68.1permanent storage full and one toner cyan is showin mpt all rady toner is full.

Sounds like it's getting clogged or jammed

Hi delumo

Thanks for trusting Fixya for solutions

It is due to bad color calibration. Do try to perform manual calibration option from the printer menu to solve the issue. And before the take the CYAN cartridge our the printer and shake it a little so that the toner powder gets spread equally. And then perform the calibrations.

You can find the user's guide here which lists all the parts and supplies. Here's the cartridge information from the manual:

• HP Color LaserJet black print cartridge Standard black cartridge CE260A
• HP Color LaserJet black print cartridge High-capacity black cartridge for CLJ4525 models only CE260X
• HP Color LaserJet cyan print cartridge Cyan cartridge CE261A
• HP Color LaserJet yellow print cartridge Yellow cartridge CE262A
• HP Color LaserJet magenta print cartridge Magenta cartridge CE263A

You can use the HP numbers to look for original or after-market replacements.

I don't like saying call the manufacturer, but in this case....
HP has an "out of the box" warranty when it comes to toners.
If you bought the toner 6 years ago, but took it out of the box 2 weeks ago, your warranty started 2 weeks ago.
Call 1-800-HP-Invent and they will of course want to troubleshoot with you, but it won't cost anything if you explain that you just installed the toner, it's new, and you are having this issue.
They should treat it as "accessory under warranty".
They'll either stumble upon what the defect in their cartridge was, or in all likelyhood they will simply replace it.

Since you have Cyan toner in places where it should not be then the only possible cause is a defective Cyan Toner cartridge. I worked on one just last week where the customer complained about Magenta toner on their prints. I also noticed Magenta toner on the Transfer Belt just as you see Cyan toner on the Transfer Belt. I replaced the Magenta Toner Cartridge and everything cleared up nicely. The Transfer Belt Unit can also cause similar problems but it would not be ONLY one color like Cyan. It would be a mixture of all colors. My bet is replace the Cyan toner and you will be fine. If you have an old empty one just shake it up a bit and try it as well. This might allow you to verify before buying a new cartridge.
Good Luck and Thank You for using Fixya.
Wheatland Services

If I remember right, the CL1000 won't print if any of the 4 colors are out. You have to replace the cyan toner in order to print, even in black and white.

If you haven't tried already, you can try taking the cyan toner out and shaking it up (just a little bit) to try to get the printer to find the little bit of toner left in the bottle.

Don't know about your "primed" toner, but go to Diagnostics and run the PQ test. See what that looks likes. Go to Disable Cartridge Check and swap the black and cyan toner. Run another PQ test. Are the lines still there and are they black or cyan? If they are cyan, the cartridge is bad. If they are black it's not the cartridge. It going to take a tech to look at it.

kindly remove the the cyan toner and shake it and install it .if it not working then install new cyan toner.

cyan toner has run out,pls replace

No, you probably just bought a defective cyan toner cart.