How to change input on philips tv - Philips Televison & Video

No.

You need to lowe the resolution AT your GADMEI Combo TV box, not at the PC since you are using the Game box to drive the monitor.

Hook up your cables from your DVD player to these input on the back of your TV. The group of ports should be labeled as video 1 input. Use the Yellow, Red and White on the back of both DVD Player and TV. Then, change the input on the TV remote to input or video 1 to watch the DVD Player.

use the up/down channel until you get to the input you have connected. You did not say you had a remote so i am using the standard fix for this.

Thanks


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

why dont u just use the vga input and select vga from your input selection. it should work just fine. if not, email me back.

The good news is that the "No Input Signal" message means that your TV is not broken. If you are trying to watch cable, then you have simply turned the TV to the wrong input channel. If your cable comes into the Philips using a coaxial cable wire, use the Philips remote to change the channel to Ch.3 or 4 - whichever channel you normally watch cable on. Make sure the cable box is turned on if you have a cable box. If the cable box connects to the TV using another type of wire, use the Ch+/- on the Philips remote and go through all the AV channels until you find the right one. Good luck! Let me know if you need additional help.

-Tha Mp3 Doctor

First, test to make sure the Philips remote is working by trying to play a dvd. If the remote control is working, then either A) your TV is set to the wrong channel, or B) you have not selected the correct source on the Philips remote.

Look at how the cables run from the back of the Philips to the TV. In the back of your TV, the slot that the cables are plugged in to is usually labelled "AV1, "AV2, "Video 1", "Input 1" or something like that. Change the television to the appropriate input/source channel.

Press the Source button on the Philips remote and make sure it says E1 or whatever the appropriate source is.

Then try changing channels using the Philips remote.

This does not exhaust every possibility, but you must check the above first to see if anything else might be wrong. If the above does not work, then I would double-check to make sure the cable/satellite box is connected to the Philips correctly.

-Tha Mp3 Doctor

turn to channel 2, push the channel down button 'till you get to either FRONT or AV

Just run the yellow cord that came supplied with the HTS from the CVBS plug in the back of the HTS to any available yellow video input on your TV, then you want to change your TV's video/source/input/channel (the wording varies by tv manufacturer) to Video 1/AV 1/Aux 1, or whatever your television is calling the yellow input that you plugged into.

Also, Philips number is 1-888-PHILIPS

-Tha Mp3 Doctor

Yes you can. This TV has both VGA-In and component in support. The only thing you need to change is the input you're using with your remote control. As easy as changing the channel!