Samsung LN-T4061F 40 in. LCD HDTV Logo
hector saldana Posted on Feb 26, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a Samsung LN-4061F and it turns on and then off and repeats the process and actually never turning on!!

Well thats basically it, it doesnt turn on, it lights up like if it were going to turn on but then it turns off and it repeats the process forever.

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 517 Answers
  • Posted on Feb 27, 2012
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Apr 10, 2011
Answers
517
Questions
0
Helped
117140
Points
1424

Try to check visually the capacitors on power supply if bulged replace it..

Testimonial: "thanks man, i had four blown capacitors, but its good now!!"

  • Anonymous Mar 01, 2012

    I have this identical problem. I called samsung and they said it was only a poblem with the 2007 models (LOL) so too bad. Have no idea what a capacitor is as I'm a nurse. Can you be more specific about what to look for? This is my second flatscreen with this problem...last one lasted 8 months.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

HI I have a Samsung LN-T4661F LCD TV, the problem is that when i power it on the picture is displayed but with distorted colours. I can see the images but it is all like negative and blurry. sound works...

Is it like this?:
http://i691.photobucket.com/albums/vv275/oldskewel/samsung_LNT4661F

I think I have the same problem on my LNT4661F. I happen to also have a 4061F and just temporarily swapped main boards, which confirmed that it is NOT the main board which is bad. Swapped LVDS cables to confirm that's OK too. If you replaced the T-con board, then that leaves the power board or the panel. Did you make any progress on this?

All the caps on the power board look good, but I hear a whistling noise from one of the power transistors.
0helpful
1answer
0helpful
1answer

I have a Samsung flat panel television, model #LN-T4042H. When I turn the tv on, it sounds like it is turning itself off and on repeatedly for more than 5 minutes before I finally hear the beeps that...

Take ur tv aparts.The power supply board is the board that ur power A/C power cord go into it.U know basic electronic.U have soldering iron,know soldering,and solders?Check all around the power supply board.Look all around the power supply board,check and see find any defective gases leakage capacitors.These dead capacitors alway have bulges or fuff up it top.Replaced these dead gases lekage capacitors will solved ur power problems.Or tries Websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
0helpful
1answer

The tv will not turn on

Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.
0helpful
1answer

Could I change NTSC to PAL N my LCD Sansung LN T

NTSC and Pal are mainly related to Cable/Air reception. Unless you are trying to connect a SCART cable, you can probably just use the video inputs of the TV. Power Supply differences will be the big issue probably.
1helpful
1answer
1helpful
1answer

Samsung LN-S5051D keeps clicking but won't turn on

Faulty parts on PS board , bad press for Samsung

Because the Samsung LNS4051D would not turn on and the power LED would blink 4 times and the relay would click and this would repeat again and again. I replaced power supply board parts CM806, 811, 812 & 817, all 1000 uf 10v capacitors, three had their tops bulged up slightly that I missed on initial visual inspection. After seeing the reports of problems with these caps on http://www.fixya.com/support/t1336881-will_not_turn_or_off , I replaced them with Radio Shack part 272-1032, 1000 uf, 35v. They are slightly bigger, but fit OK. TV is working fine now. Cost was 4 x $1.59 = $6.36 plus the time. I saved between $100 to 300 in the process of either replacing the board or getting the unit serviced.
2helpful
1answer

Samsung model LNS4051DX/XAA won't turn on, just clicks

THE PROBLEM IS Faulty parts on PS board , bad press for Samsung

Because the Samsung LNS4051D would not turn on and the power LED would blink 4 times and the relay would click and this would repeat again and again. I replaced power supply board parts CM806, 811, 812 & 817, all 1000 uf 10v capacitors, three had their tops bulged up slightly that I missed on initial visual inspection. After seeing the reports of problems with these caps on http://www.fixya.com/support/t1336881-will_not_turn_or_off , I replaced them with Radio Shack part 272-1032, 1000 uf, 35v. They are slightly bigger, but fit OK. TV is working fine now. Cost was 4 x $1.59 = $6.36 plus the time. I saved between $100 to 300 in the process of either replacing the board or getting the unit serviced.
Not finding what you are looking for?

434 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...