Child Lock continuously flashing

Child Lock
?When activated all the buttons will be disabled and a child will not be
able to alter any wash programme or option settings. Once selected
this feature remains activated, even when the machine is 'off'.
To use this feature press the 'Child Lock' button and hold down for 2
seconds.The child safe icon will begin to flash.When the icon stops flashing
the feature is activated.If any of the control buttons are pressed, the child
safe icon will flash and the machine will bleep 3 times: no alterations to the
control settings will be allowed.If power is interrupted, at any time,pressing
any button will reactivate the child lock feature.
To deactivate this feature hold the 'Child Lock' button down for 4
seconds.You will then hear a bleep and the child safe icon will go out

Hello. Your Kitchenaid unit has the child-lock enabled. Look for a button(or set of buttons) that has a small lock symbol beneath or the word "lock". On most models, you have to push and hold the button(s) until the lock light goes out(usually about 3-5 seconds). That should disable the lock and the unit should operate normally. I hope this helps you!

im not sure if your model of dryer but here is some instructions
Child lock
When activated, the child lock prevents the dryer from being operated by locking the control panel functions.
The dryer can be turned on but not started. The "Child lock" indicator will flash.
The door can be opened.
To activate the child lock
1. Make sure the dryer is turned off and
the door is closed.
2. Press and hold the "Anti-crease" and "DRYNESS" buttons at the same time, hold until step 5.
3. Turn on the dryer with the "On/Off" button.
4. Press the "OPTIONS" button 3 times. 5. Release the "Anti-crease" and
"DRYNESS" buttons.
The "Child lock" indicator will flash and the dryer is now locked.
6. Turn off the dryer using the "On/Off" button.
To deactivate the child lock Repeat steps 1. to 5.
The "Child lock" indicator will go out. The control panel is now unlocked.
6. Turn off the dryer using the "On/Off" button.

Hi trrhodes,

I believe the CL you are getting means "Child Lock". Under normal circumstances there should be no activity at all on your machine.

Please do the following:
- On the Facial Panel (Where the buttons are located), look for 2 buttons marked together with a line, it should also have a face of a child somewhere on that line.
- Press both these buttons together for 3 - 5 seconds, this should reset the Child Lock.

Kind Regards :-)

Jacques

*If you found this solution helpful, please rate it

Pulse y mantenga pulsado
durante 4 segundos. SEGURO PARA NI?OS brilla.
Si pulsa cualquier tecla, mientras que su lavavajillas est? bloqueado, el
la luz parpadea 3 veces.
Para desactivar el bloqueo para ni?os
Presione y mantenga AHORRO DE ENERG?A EN SECO durante 4 segundos. El
la luz se apaga.

for those of us in English... the child lock is on...
Press and hold
for 4 seconds. CHILD LOCK glows.
If you press any pad while your dishwasher is locked, the
light flashes 3 times.
To turn off the Child Lock
Press and hold ENERGY SAVER DRY for 4 seconds. The
light turns off.

Hi,

Please find complete process to switch off the child lock.

http://www.ehow.com/how_5144877_turn-kitchenaid-dishwasher-child-lock.html

Most of the dishwashers are same so the model should not be a problem

Thanks

To turn off the Child Lock
Press and hold ENERGY SAVER DRY for 4 seconds. The
light turns off.

Without knowing the manufacturer and model number, it is impossible to be specific. But most dishwashers that have a control lock light means that you have a child safety feature on the dishwasher. If you look closely, you may see some symbol that ties two buttons together and maybe if you press both at the same time, the child lock out may turn off.

Post info about the make and model here to get more specific.

Error CL means that the child lock had been activated.
To unlock the machine you should put your finger up inside the handle and locate a slider switch, then push the switch to to the left side.

Pressing "timer/clock" button 4 times turns on and off demo mode.