Gryphon gm4100 ean 128 ]c1 identifier - Datalogic Gryphon I GM4100 Barcode Scanner PN GM4130WH910K1 Barcode Scanner

I am not sure you can add a pause in the Prefix per se, but you can increase the Intercharacter delay which should achieve the result you want.

Download the Product Reference Guide for the GM4100 from this page: Gryphon GD4100

Here is the direct link to the 13MB PDF:
http://www.datalogic.com/tools/download.aspx?iddwnfile=1608&path=%2fupload%2fmarketlit%2fmanuals%2fgryphon%2f820050514.pdf&name=820050514

You will need to print several pages so that you can scan the appropriate codes to change the scanner setup. Follow the instructions on the following pages:

Pages 47 and 292 describes the Intercharacter Delay.
Pages 351 and 352 in Appendix D give you the number scans you will also need.

You might start with a 10ms delay and increase this until it works. A little experimentation will surely solve your problem.

Can you show us the printed numbers before going further?

Which part of programming you required?Data Editing?Header/Terminator configuration?

It sounds like the scanner has the Symbol Code ID character enabled and you are scanning a GS1-128 (formerly known as UCC/EAN 128) code. You can disable this by scanning the Symbol Code ID None barcode from Adobe page 211 of 460 (Chapter 12 page 3) of the LS9208 Product Reference Guide. https://atgsupportcentral.motorolasolutions.com/content/emb/docs/manuals/6083309a.pdf

Page 80, Section GS1-128 AIM ID Section of Product Reference Guide (PRG), Gryphon I GD4100/GBT4100/GM4100 and Gryphon L GD4300 (English)
Manuals

Nokia C1-01 is an entry level phone that is ideal for those looking for a simple, user-friendly device with all the basic functions. Weighing just 78.8 g, the candy bar shaped mobile measures 108 x 45 x 14 mm and fits right in your pockets or palms. The 1.8-inch screen with resolution of 128 x 160 and 65,000 color support gives crisp display.

The Nokia mobile runs on the S40 software platform with the option of upgrading it over the air and operates on 2G network. The C1-01 is fitted with a VGA camera that lets you click images of 640 x 480 pixels resolution. The phone camera can also be used to record videos of 128 x 96 resolution at 10 fps.

you need to scan some of the bar codes found on the manual.
Find the product reference manual -usually found on the cd with the scanner or download from motorola site - and in chapter "symbologies" scan "ENABLE CODE128" barcode.
To have prefix when a code is scanned, scan "SCAN OPTIONS" then " then "ENTER"
Last set the preffix value by scanning "SCAN PREFFIX" then four digits that correspond to the character you want to use as preffix.
If you need more than one character for preffix then you will need the Advanced formatting manual, which ican be downloaded from motorola. In this case you need to create a "rule".

Let me know if you need further assistance

the problem can be on the software that bild the label format, not on the printer.

Hello
you've solved? Do you want to reset the online? Roberto

hi You must identify the codec fedex. Then see if Manual can 'read. Roberto