- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello,
You cannot without a LIFETIME SUBSCRIPTION.
Or Subscribe for the monthly fee.
Look into some of the older ReplayTV Units.
RTV-1000,2000,3000 series. You can do manual record without a fee.
There are some Tivo Hack Software Tips out on the internet.
But not sure how well they work.
Either that http://www.weaknees.com/replaytv-showstopper.php
or buy yourself a hard drive and configure it following http://www.tomshardware.co.uk/forum/page-27662_30_0.html
Hello. here is a weboite that has free schematic downloads. if you can not find it there, then go to the website of your product where you can download the manual. go to support, then downloads, then look for the manual. anyway, here is the web site for free schematics online.http://www.eserviceinfo.com/
If you determined it is the power suppy, the but a parts replay off ebay and replace it. If it has a lifetime then worth fixing, if not just pick up a lifetime unit off ebay
First Converter boxes are a poor economic investment. Second you have an HDTV. It does not need a Converter box. Just connect an amplified antenna.
Specs:
Built-in ATSC QAM Tuners - QAM and ATSC tuners included to enable the set to receive Digital cable-in-the-clear signals, as well as digital terrestrial broadcasts. HDTV reception is possible by adding an Optional HDTV antenna
The short answer is yes. The method is to set the TV to receive either channel 3 or 4. The converter will receive the digital broadcasts and "re-broadcast" them on either 3 or 4 analog for the TV to receive.
1. Press Menu on the remote.
2. Choose Setup from the menu.
3. Scroll to Connect to ReplayTV Service Now.
4. If you don't have this option try this.
For ReplayTVs running older software:
1. First, exit any menus you're currently in.
2. Press "2-4-3" on the remote followed quickly by pressing the "Zones" button - this will launch an informational screen, with like a 1-Exit, 2-Clear the Channel, etc.
3. Select #7, 'Net Connect' from the menu. (#4 on ReplayTV 2000 or 3000 series). A message at the bottom of the tv screen will indicate a successful connection.
If you are unable to force a connection using this method, you may need to reboot your unit. This is done by pressing and holding the "Power" button on the front of the unit for 10 seconds. (Note: When you hear the fan in the rear of the unit turn off, your unit is rebooting.) Now repeat the previous instructions to force a connection. This is all found on the support site:
http://www.digitalnetworksna.com/support/replaytv/document.asp?docID=87
×