Computer won't start - went into boot menu with R12. Ran Diagnostics, and getting the Error Code "Status 79" on HDD scan. What to do? Note- I am likely beyond warranty at this point.
SOURCE: my dell optiplex gx200 bios can't boot
maybe try taking out the cmos battery located in your case, looks like a small watch battery, that will clear bios settings and start from scratch, if there is no battery then there is a jumper sequence to do this
SOURCE: Dell Optiplex 170L does not recognise an 80GB Hard Drive
Just for giggles try changing the boot order so that the C drive is first
SOURCE: FATAL ERROR MESSAGE/DELL OPTIPLEX GX150 DESKTOP/WINDOWS XP PRO
I have experienced this problem as well, it is either the CD is scratch
or the CD-rom lens needs cleaning, however it can read the content of
the CD, I would susgest you try a another CD-rom ,
borrow it from a friend. It works for me.
SOURCE: Error: Cannot Display This Video Mode
You may have to boot into safe mode and reset the video settings to a safe setting like 1024x768.
If the problem goes away, then you are good. Otherwise, you'll have to boot menu again (F8) and choose Enable VGA Mode.
SOURCE: IDE Device Failed on Dell Dimension
Hi
Thank you for your query
From the error message that you are seeing you are having a issue with one or both of your IDE devices. These devices are your Hard drive or/and your CD/DVD drive
I would not recommned that you tackle it yourself if you have no PC engineering experience
Please book into a reputabe firm for further diagnosis, it may be that you may need to discoonect the IDE drive from the devices and give it a clean or alternativley one of the devices may be faulty
If this has been useful please leave positive feedback/vote/testimonial as
this will help me greatly - Thank you again
If you wait too
long and the Microsoft® Windows® logo appears, continue to wait until
you see the Windows desktop. Then shut down your computer through the Start menu and try again.
207 views
Usually answered in minutes!
×