Jenn Aire lock for self clean in locked position

Call for service. You likely need a new display module. If you fancy trying to fix it, you try and get in behind it and check the connections to it. Remove, clean and replace.

Hi,

Before you go working too hard to get you oven to go into the self clean mode(self destruct)....check out this tip...

Self Cleaning Oven Problem


heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!

It will remain locked until the temperature is safely as low as it should be. You just have to wait and be patient.

jenn-air electric wall self-cleaning oven 27 inch. Mobel # w130w. I need to see the knobs to set self-clean

Go here to get the manual -

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%20W10176680.pdf

you acn CANCEL the cycle, but will lremained locked unitill it cools off!

We own a Jenn-Aire model W27400W oven. The display module has gradually gone dim over a period of several months prior to the end of the warranty, and the display is no longer visible. It is apparent that several Jenn-Aire oven models use the same display. Does Anyone else have the same problem, and If so, are they willing to join a class-action suit against Jenn-Aire with us?
Steve Patterson
303-256-8494
[email protected]

Jenn Aire model tag are usually at the opening of the door, or may have to pull unit out...be sure to check around the door before pulling out.

The lock motor may have failed. Most often, bending a coat hanger into a hook and sliding from the right side as you move the door to the right,will allow you to release the lock and open the door.

need model number and ill tell you how to open mod number prob at pull out drawer