No response AT ALL from player or on the computer

my rio carbon had the same problem and displayed upgrader all the time if it helps what i did was i cf modded my rio carbon look on google and see if your rio chiba can be cf modded and if that works that would be pretty cool and remember if you have any tech problems or mp3 problems google it and google usually will have an answer have a good day

maybe your problem is the microdrive that Rio Carbon have...
mine also have the same problem and now is still seraching for cf card exchange for the microdrive

funny mine is doing the same thing the day before i a leaving to go on a trip.

Mine wasn't recognising the player through the USB cable so I followed Mantraguy's instructions to reload the firmware. Make sure though that you hold down the menu key before you switch on the player. Then it shows upgrade and you can reload the firmware. Of course you will lose all the songs on the internal memory but if it isn't working anyway.

good luck

http://www.digitalnetworksna.com/support/rio/product.asp?prodID=213
Download firmware update ( same for ALL Forge players)
Install upgrade (run program from your desktop)

Stuck in upgrader mode. Try resetting by inserting a small #1 paperclip in the player. Otherwise, go to the Rio website at realnetworks and download the firmware upgrade.

-Tha Mp3 Doctor

Hi. I recommend a firmware upgrade. You can obtain this by doing the following: 1) Connect the player to your computer with the USB cable. 2) Wait for "idle" to be displayed on the player screen. 3) Double-click the file that you downloaded from the Rio website. The update should take approximately 30 seconds to load. and here is the link for your firmware upgrade file. http://www.digitalnetworksna.com/support/rio/downloads/ce2100/RioCe2100_firmware_143.exe Good Luck

UPGRADER is a mode that purges the firmware from the Rio player prior to flashing the unit. Firmware is basically the operating system for the player, so if it is corrupted any number of things can occur. You can enter UPGRADER mode to update the firmware on your player by holding down the MENU button when you power the Rio ON. Flashing the player in this mode erases all content. Try the following to get the unit out of UPGRADER mode, if powering OFF the unit will not correct it. ALL PLAYERS - If you accidentally entered UPGRADER mode, turn the unit OFF and then back ON again. - Download the latest version of the firmware for your player and upgrade the unit. Visit http://www.digitalnetworksna.com/support/rio - It may be necessary to run the firmware update more than once. - This process may erase content from your player. - If the player is detected by the computer, it is recommended that you format the player, which WILL erase content from the player. - Macintosh user's try flashing the player on a PC. FLASH MEMORY PLAYERS - Remove the battery and replace it, this will reset the unit. The Rio Forge, Rio se510, Rio Cali [Black Rio Stick], and Rio Chiba [Black Rio Stick] can lock up causing the player to be unresponsive. If this occurs there are two things that need to be performed to resolve the issue. First you want to remove power from the player this includes the battery and a USB connection for 20 minutes to reset the player. There is a capacitor on the player that stores a charge that holds the player in the locked state. By waiting the duration the capacitor will discharge and the player should function as normal. Second you will want to upgrade the firmware to the latest version and format the player to prevent future occurrences. HARD DISK DRIVE PLAYERS - If you have a Carbon, Nitrus, Eigen, or Karma, use a paper clip to reset the unit. Your Rio will power off automatically when it has been reset. It may be necessary to connect the player to AC power and then reset the player if it will not turn on. If you are still unable to have the player exit UPGRADER Mode, then try it on another computer. UPGRADE FIRMWARE - Connect to the internet - Go to http://www.digitalnetworksna.com/support/rio/ - Click on the appropriate player - Click on the FIRMWARE tab [showing by default] - Click on the latest firmware file [example: RioForge_firmware_133.exe] - Click SAVE when prompted - From the SA

You will have broken the hard drive,

Try replacing it with a CF card,

Everybody says that this does not work but it definitely does!

My Rio got dropped and I completely buggered the hard drive so after reading many forums saying that it didn't work I read one that said that someone had told them that sandisk ultra II ones worked (very vague!)

Because I had nothing to lose I went out and bought a 1GB sandisk Ultra II CF card. I then took apart my rio and replaced the hard drive with the CF card. Still not thinking it was going to work I plugged it into my computer and installed the latest firmware (from the rio website) and then HEY PRESTO!!!!!! it works.

I have yet to try an 8GB ultra II card but when I do i will keep you posted.

If you don't believe me then I don't blame you but If you send me a request then I can send you pictures and more details...

Rio will live on

Hope this helps

Mowcius

1. go to http://www.digitalnetworksna.com/support/r....asp?prodID=213 and download update 1.33 2. install update in C:\RioForge\Flash133 3. run RioForgeFlash_133.exe from C:\RioForge\Flash133 4. press Rio Forge menu button and turn the unit on. "upgrader" will appear on screen. 5. plug USB cable to RioForge. 6. click "next" on Rio Upgrade Wizard. Wizard will detect your player. Select and click "next". Upgrade will take place. 7. Unplug Rio Forge from USB and turn it on. Voil?!