Hslc8129hdi Hi sense tv... screens gone blank...only had it for 3 months, anyone having the same problem and know how to solve it?

The convergence board is defective and it needs replace, to have a service man take care of your set it will run around 450. If it was me I would just replace the set with a new LCD. take care.

THE WAY I DO IT FOR ALL TV
usually you got 4 screw in the back of the tv need the bottom
be sure to put tv face down on your bed you gone have a surprise
gone fall from the stand
and pull it from the tv by the buttom

does the shop where you had it fixed give you a warranty Id talk to them sounds like a heat realted problem on the mainboard

If the TV is more than 3- 4 years old the plasma is gone tray to call Philips or go for a new one it wiil cost over $ 300.00 to re fill and you dont get more than one year waranty.

Hello Karthik,
This must surely be a problem with your monitor, because you say that you see the white screen while boot up. If this is a graphic driver issue, you may have the problem after booting up in windows. Since its been only a month old laptop, the product must be in warranty for sure. Take away any CDs in the drive, any USB drives and see if this white screen appears. Let us know.

Thank you!
Sabharish

check if its on all the video sources. check it on dvd if its there then contact the customer care

Try removing and reseating your CPU, video cable and or memory. If nothing stills hapens, your video card or chip may have gone bad. Please let me know if this works.

I have the same problem and need help. Have this TV over 5 years and don't know what to do this it

This is what is known as frame collapse - which means there is no vertical deflection applied to the tube.

Please do not continue to watch the set in this condition as it may burn a horizontal line in the middle of the screen.

The most likely cause is either bad solder connections to or failure of the frame vertical output IC.

Please rate the assistance I have given - I hope it is useful. If you call a serviceman and tell him its frame collapse as this type of repair is not for amateurs - voltages in television receivers can kill.

dude just **** ****