Hitachi 46F500 46" Rear Projection HDTV-Ready Television Logo

Related Topics:

alex tipsword Posted on Oct 25, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

No sound, no picture, blinking LED.

I did an IC swap, and my tv would turn on, then immediately turn back off, so I tried to put the original IC's back in, and I could only get one in because the prongs on one are bent, and now my tv turns on and stays on but LED 28VID940 is blinking and I have no sound or picture. I'm going to try and get the other original IC back in in the morning, and if that doesn't fix it I'll need your help.

  • Anonymous Jan 05, 2009

    need to find info already posted on the loss of audio and video service on a 46 inch hitachi tv model 45F500

×

1 Answer

easy alberta

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 132 Answers
  • Posted on Dec 06, 2008
easy alberta
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Governor:

An expert whose answer got voted for 20 times.

Joined: Jun 20, 2008
Answers
132
Questions
0
Helped
47555
Points
234

You must use the original stk 392-110 and stk 392-150 and do not mix them up. There is one of each.

All the suggestions about substituting other ICs for 110's are Bullplop, except for Hitachi manufacturers upgrade with changed resistor values included.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Tv plays about 2 minutes and picture and sound goes off, comes back on.Does this 3 times then tv shuts.turn tv back on and repeats sequence.

there is main board defective please replace the main board 3 time blink is dc alert which is happened in side the system ic & we cant replace the system ic so we replace complete main board
0helpful
1answer

LG 42PC!R Plasma TV turns on and then green led blinking with no ppicture and sound !

Your problem is most likely a fried circuit board. I always connect my good electronic to a back up battery. but your problem might have been storm or surge related, I would take it to a repair center and get an estimate.
0helpful
1answer

My sony trinitron kV ES 34M90 GIVES 6 ERROR BLINK CODES

Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206. To get more details, http://electronicshelponline.blogspot.com/
0helpful
1answer

STAND BY BLINKING LED 6 TIMES

Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206. For more information go to http://electronicshelponline.blogspot.com/
0helpful
1answer

Power on, sound no picture for three seconds, power off, led blinks 6 times pause repeat

  • Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206.

That means no horizontal output which could be caused by a faulty driver stage or even a faulty power supply.
Hope that helps.
5helpful
2answers

Try to turn on, it turns off right away and the stand by light flashes 6 times

Hi


Thanks for using FixYa. Standby/Timer light blinking 6 Times means no Horizontal (H STOP), no raster, and so the set goes to the blinking self-diagnosis function immediately. You’ll need to open the back off the TV and check C515 & 516 and the jungle IC, IC206. Also check +5 line is overloaded (A, B boards), +5 line is shorted (A, B boards). Please do rate the solution if the issue is resolved or post a comment for further assistance.



Thanks
Rylee

0helpful
1answer

TV does not turn on. Stand By LED blinks 4 times and pauses and blinks 4 times again Tv will not turn on...when plugged in the red stand by light flashes 4 times...you can hear the tv turn on but a black...

Try to remove the vertical IC sometimes it become Shorted causing the B+ to drop. after removing try to switch on back check the B+ if ok and the LED not blinking then change the vertical IC.

0helpful
1answer

TV does not turn on, blinking red LED

Problem is a bad audio IC esp if your are reciving 11 blink code
if it is a 5 blink code replace Crystal 1h00 On Ssb new part number is 24225430 1397
0helpful
1answer

Sony KP-51WS510, standby led blinks 5 times

It sound like you have a bad picture tube...check your 1k circuit for correct voltage and wave form.
0helpful
1answer

Black picture, red light blinking

YOU HAVE A VERTICAL PROBLEM,IT MIGHT BE A RESISTOR TO IC VERTICAL HAVE BEEN LOST/BREAK OR THE IC HAVE BEEN BROKE.TRY TO CHECK THE 24 VOLT SOURCE OF VOLTAGE TO VERTICAL BLOCK FROM FLY-BACK TRANSFORMER.
Not finding what you are looking for?

113 views

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...