Singer Quantum XL 1 red button not working

Question edited for clarity.
Question moved from Washing Machines to make model category.

This is what they say about this machine;

The Singer Quantum XL-6000 is the most technologically advanced sewing and embroidery machine on the market. If you're looking for a total fusion of innovation and imagination, look no further than this machine.

And in doing so, they make a machine that is software operating hardware and you can't fix them yourself. Try a Warranty Claim

Support

Singer https://www.singer.com > en-ca > support
General. About Us · Brand Ambassadors · History · SVP Worldwide ; Shopping Help. Shipping and Delivery · Returns & Refunds · Ordering FAQs · Store Locator · Find ...

• 
  

  Warranty center

  https://www.singer.com > en-ca > warranty-center
  Singer has over 400 Warranty Center locations in the US and Canada which provide expert repair services and quality Singer parts for our sewing machines.

It is here

https://thesilkpincushionboutique.com/product/service-manual-singer-quantum-xl-1-professional-xl-1-sewing-machine/

https://www.google.com/search?q=singer+quantum+xl-1+service+manual

..

There are service points on all Singer machines, Your best bet would be to consult a Singer Service Technician in reference to your model!

I have instructions for recalibrating the screen on an XL-6000, which is similar enough that it should work; however, give it a try at your own risk. I would point out, though, that at this point you probably have nothing to lose.

While the machine is turned off, you hold down the scissors button, reverse button, and the green/red light button all at the same time. While pressing these buttons, you turn your machine on and can let go of the buttons. You take the pointy end of your lint brush and use it as a stylus to touch a little red dot on the screen (that also has that pen looking thing that I had messed with and that caused my trouble), the dot will move to another position and you will touch it again. It moves again two more times, and each time you will touch it with the pointy end of the brush. Then you will touch the treasure chest box on the screen to save what you did. You will then turn off the machine and turn it back on, and then things work again!

It's in your book under calibrating the touch screen.

Please see the link:
http://www.sewingpartsonline.com/singer-quantum-xl150-sewing-machine-parts.aspx

It is called a "stepping motor." You may be able to find a generic model or one from a donor machine that would work.



Singer XL 550 Service Manual Basic Positioning Of Zigzag Step Motor

Singer XL 1000 List Of Parts

You might try contacting some of the online vendors for advice:

http://www.sewingpartsonline.com/singer-quantum-xl1000-sewing-machine-parts.aspx

Service Manual Singer Quantum XL1000

Of course needs oil u might have ******** it up.Try oil.

Hi jlbostwick,

Here's what you can do to recalibrate the touchscreen of your machine:

Enter service mode.

1.Press the start/stop switch and hold it while you power the machine on.

2. Then, press the reverse switch, hold it and press the LCD.

3. Release the reverse switch AFTER you touch the LCD.

Hope this helps.

Thank you for using FixYa.

Go to the internet, type find manual for Singer Quantum XL-1000, you should get a lot of links of which you can download.