Black screen with audio available

In order to connect an AV receiver to a TV using component cables (Red & White) you will need to connect the component cables to an available AUDIO "OUTPUT" on the TV (red to red and white to white). Then the other end of this same cable will be connected to an available AUDIO "INPUT" on the AV receiver. The TV (via the menu or setup button) may have to be set to where the audio signal is output to a home theater and not to the TV speakers. Once connected, the AV receiver should then be set to the Audio input used in order to listen to what the TV is showing on screen.

Sir press the screen mode button in your remote below input select button, press the screen mode button repeatedly to select smart, 4:3, wide, zoom, or 14:9.

• Smart- Display conventional 4:3 broadcast with an imitation wide screen effect. The 4:3 picture is stretched to fill the screen.
• 4:3- Display conventional 4:3 broadcast non-wide screen TV in the correct proportions.
• Wide- Display wide screen 16:9 broadcast in the correct proportions.
• Zoom- Display cinemascopic letter box format broadcasts in the correct proportions.
• 14:9- Display 14:9 broadcasts in the correct proportions. As a result, black border areas are visible on the screen.

If you have the remote, press the AV/TV button. If you have no button with AV/TV written next to it, look for a symbol that is the outline of a TV with a small + sign in the corner. Or, worse case simply press each button one by one, until you find the one that switches the channel. If you bring up something on screen you're not sure about, turn the TV off and back on again.

Most likely you are on the wrong source chanell. look for an AV/TV button. keep changing that untill you get to the TV stations. If you have a set top box make sure it is turned on. Also the appropriate AV channel will be the one that the set top box is plugged into.

hello chis, it may the ps3 your having trouble with connect ps3 to hdmi 1 reset the ps3 by doing this. press and hold the standby button on the front of the ps3 you will hear 1 bleep then 2 short bleeps after the short bleeps release the button this will reset the display setting on the ps3 you should get1080p if this dfon't work feel free to get back to me thanks

regards
shaun

double check the wires are in the correct connections on both the tv and dvd player also the KHL dvd player may need to be put in progressive scan. Usually the red wire for video and the one for audio get plugged into the wrong input and causes this issue

It sounds like she may have cracked the LCD display.
LCD (liquid crystal display) are very delicate nad any impact, even by a three year old could damage the screen beyond repair. Could you please submit a photo of the screen when on?

Hi, the av lead with the three connectors at the end make sure you have them connected correctly -
Yellow - Video
White - Left Audio
Red - Right Audio

It's a simple mistake to make , but check it.

Let me know - Anthony

the closed caption is set to text. go to the menu and turn cc off.

Turn off the closed capition