I cant find the wall mounting holes on the AKAI LCT2785TA

SOURCE: akai 32"

I just purchased this unit and briefly looked at removing the stand though I haven't taken it off yet. Anyways, I think you need to remove the black metal mounting frame from the TV before trying to unscrew the stand (4 screws) from the metal frame. After the frame is off the TV, I think you can then get at a couple of hidden screws to remove the stand from frame. I don't know if the frame goes back on the TV or not.

SOURCE: Attaching Wall Mount Support to AKAI Flat Panel

You use the four outer holes as suggested in the manual on page 12, see below:

SOURCE: Akai LCT2785TA Capacitors blown out

Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or
not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.

I repair these power supplies. Write to [email protected] if you require further assistance.

SOURCE: Akai LCT2785TA troubleshooting

Open the back of the TV,and look at the can shaped items called capacitors on the circuit boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!

Tyler

SOURCE: No screws to mount AKAI LCT3701AD LCD TV.

Hi i bought mine at home depot for a few dollars they were very helpfull there and they worked great...