Hi I can't remember the password, I set on my euro line ds-555 reciever, and i wont to reset it please help. please replay by E-mail [email protected]

reset your action replay with a computer code manger

you can download the code manager from www.codejunkies.com. If the one you want isn't there I would recommended just trying a google search for: free action replay code manager download
If this doesn't work, then you can reset your action replay.
CAUTION
If you reset your action replay, ALL YOUR GAMES WILL BE ERASED, but you will probably be able to add in new codes. I DO NOT RECOMMEND THIS. you won't easily be able to get back all the codes you had before. Just to make sure you know what I'm saying, if you reset your action replay all the codes you put on it, and all the codes that were on it when you got is will be GONE, ERASED, DELETED. if you still wan't to reset it do this:
with your ds off, hold a and b. still holding a and b, turn your ds on. when your ds turns on, press and hold start and select( you will now be holding start, select, a, and b). You will notice that the action replay will take longer to go to the main screen. when it does, you will not have ANY codes on your action replay at all, but you will probably be able to add new ones. REMEMBER, I DO NOT RECOMMEND DOING THIS!!!
If you did reset your action replay, put in a game( on the main action replay screen) At the top of the bottom screen, or the bottom of the top screen( I can't remember) It will say unknown game and the a code. write the code down. when you have, take out the game. Then insert the action replay. tap the button that looks like a gear. Then hit add new game. type in the games name, then hit continue, then the code you wrote down. hit continue again. the game will then be added. then do what you would normally do to add games. they should work. If it still won't let you add games, then look as hard as you can for a downloadable code manager. if you find one, just hit quick update ( it looks like a ds on your computer screen) this should put the games back on it. if not then try to take it back to the place you got it at. If they won't refund you I would try to get in touch with datel. They will probably send you a new one if you send the old one with the letter ( you should probably mail it not email it). In the letter, ask specifically for a complimentary new action replay.
the phone number for datel action replay support is 0906 550 1236
If you don't want to mail them, the site you want is http://uk.codejunkies.com/support_request.aspx
It will probably take them a while to get back to you. by the way i believe that Calls cost £1 per minute. Sorry if you have no way to pay from a bank account. You might consider having a parent do it if you call them.
the mailing address is
UK Contact Details
Stafford Road
Stone
Staffordshire
ST15 0DG
United Kingdom
Hope I helped you.
If you need more help my email is [email protected] or [email protected]
P.S. If your thinking of hate mailing me that you screwed up your action replay, remember that I did warn you that I didn't recommended it.

Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems:

* Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes.

* Code Manager PC software is reporting the console`s battery is low when it’s actually fully charged.

* Multicolored bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes.

* You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error.

If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased.

1. With your console powered off insert the Action Replay DS

2. Hold down buttons A+B

3. Turn your console on

4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down

5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen

6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again

i had the same prob
Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems:
* Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes.
* Code Manager PC software is reporting the console`s battery is low when it’s actually fully charged.
* Multicoloured bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes. * You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error.
If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased.

1. With your console powered off insert the Action Replay DS
2. Hold down buttons A+B
3. Turn your console on
4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down
5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen
6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again

from codejunkies

Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems: * Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes. * Code Manager PC software is reporting the console`s battery is low when it?s actually fully charged. * Multicoloured bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes. * You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error. If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased. With your console powered off insert the Action Replay DS Hold down buttons A+B Turn your console on With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen If Action Replay DS doesn?t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again whats an ard? from code junkies

u need to reset the action replay.. read the guide that came with it and it will tell you how to reset it..
hope this helps.

The AR should come pre-loaded with codes for most games. If you followed the directions carefully and there are no codes for your game I suggest following the AR update instructions in the booklet to reset and download the most up to date codelists for your games.

well as you said before....maybe the flash memory inside of your DS AR is corrupted...or even bronken..

I Believe it´s a AR hardware Problem...You can open the cartridge... Try to Clean the contacts..,See if you can find broken soldering contacts inside the AR...
Try to Check if the eletronic circuits and see if it is a real "CI" installed or a dismissable Chip "clone"
if it´s clone it´s certainly damaged and there´s nothing you can do to recover it..
Good Luck!

I have just found the solution to the problem (2 minutes later XD)
Quote CodeJunkies' Support site:

Try resetting the Action Replay by following these steps:

1. Insert the Action Replay into the DS
2. While the Action Replay software is loading, press and hold all the following buttons: A + B + Start + Select.
3. Release all of the buttons once the Action Replay is at the main menu.

The first screen should persist for much longer than normal, and when the Action Replay DS main menu loads, your hardware should be reset.

Once the reset has been performed, try connecting the USB cable to your PC, opening up the code manager software and transferring data again.

It won't return all of your games back, but it will allow you to start on a clean slate again. (Using the update feature will bring most, if not all of your games back

Often the default password for phones is the last 4 digits of your phone number. (If your phone number is 206-555-1234 then your password is 1234)

If you changed it, and can't remember it... Try taking it to your cell phone service provider, and ask them to reset it. Or try to remember it, because honestly I think you're out of luck.
=\ sorry