DSL 2640 T - Wireless connection problem

try to update the wireless driver of your computer. check if your computer uses wireless utility other than windows (ex: intel proset wireless). if yes, uninstall it and restart the computer.

open the access points in the internet explorer
in it set the wireless security to WEP and provide the network encrypted password

Please refer this. In case of any issue, please let me know http://www.dlink.co.in/Upload/UploadDownload/DSL-2640T.pdf

This one can be one of two things.

If you have a digital multimeter, check the power connection and make sure that it's not to high (eg. 7.5 V DC should read no more than 7.8 V for it to work properly)

Otherwise, just reset the router. I have a feeling it is the first one.

Once it reaches to 130% above of what's rated, it can fry your network adapter in your computer and possibly more damage if it's wired.

Try to see if there is sufficient ip address the router gives. The flashing thing only means that it is processing infos.

Dear,
Please refer this. In case of any issue, please let me know http://www.dlink.co.in/Upload/UploadDownload/DSL-2640T.pdf

Try diagnose and repaire the connection if that does not work Reset your modem it should go back to default manufacture setup.Then turn modem off and connect any computer or laptop to the modem with ethernet wire turn the modem on go back to your computer that you are connected to modem with wire go to network connections and disable the wireless Network connection and enable local area connection once you see you have connected and have internet working go to start menu you can do this on the start search bar with vista or run with any other windows version type cmd and press enter, it should bring a DOS command menu and then type in ipconfig and enter scroll up and down to where you see default gateway type that ip address to your internet browser it should take you to login screen username should be administrator password admin setup your WEB key make the wireless access available DO NOT FORGET to write the web key down, give a name to the connection and change the default password from admin to something you can remember. save the settings and turn that off keep the laptop on. Then unplug the ethernet cable and switch the network connectiion again enable wireless disable local area also you need to scan the available wireless internet and pick the one you just named use the webkey to access and save when the connection in made.

could you able to solve.pse share

i think your problem is the configuration,in the security of your wap.try to configure it again.