Several weeks ago the display screen has horizontal streaks and then the problem vanished. Now the camera does not take pictures. It will display pictures and it will flash but it will not record pictures. The program on the computer does not recognize and photos as being recorded for down load. A different memory card has no corrective effect. I need to repair this or take the camera in to a digital repair facility.I'm not interested in replacing the camera with a new one a purchase at this time.
SOURCE: Canon Powershot A70
There is a button on the back that can be pressed called Disp. (stands
for Display). There are two or three settings it flips through each
time you press the button. Press this button a few times to cycle through
the choices in each of the playback and camera mode to see if this resolves your issue. Happy snapping...
SOURCE: Canon power shot A70 does not show an image on the screen.
Canon has recalled a bunch of these.....follow this link
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2112&fcategoryid=221&modelid=8776
SOURCE: Purchased camera in March and
Sounds like you're switching the same card between cameras. Rule #1...one card per camera. Format the card in the camera it is to be used in. There is no Rule #2.
SOURCE: My DMC-FS4 has message 'This memory card is locked'
Move the slide switch on the side of the card.
SOURCE: My lumix DMC-FS5 camera keeps
In the camera menu, you will find an entry for "copy" which gives you the option to copy the internal memory to a memory card. Once that is done, remove your card, go back into the menu and find "format"...follow the on-screen instructions to erase the internal memory and promise yourself to never use it again. After that, your memory card should work properly in the camera.
74 views
Usually answered in minutes!
I have sense learned that a recall has been issued by Canon for all a a70's and others regardless of warranty status. (FREE REPAIR and SHIPPING)
×