Canon powershot g3 camera download free driver

You don't need any additional software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Windows Photo Gallery or any other photo cataloging program.

Hello
You can get drivers of G3 from Cannon official web site Here
http://software.canon-europe.com/products/0000581.asp
Hope this helps, if so do rate the solution Good Luck

sir you can download your driver from this links below

http://driverscollection.com/?file_cid=42478156611cc7f52fa43e67fa2

http://www.downloadatoz.com/driver/item_canon-powershot-g3-camera-wia-driver-5-0-5.html

http://www.driverskit.com/freedownload/Camera/Canon/PowerShot_G3_USB_Twain_5_0_0/18155.html

and from canon website to

http://software.canon-europe.com/products/0000581.asp

hope that it will be help full
thanks

you need 64-bit drivers for window 7... search on internet..

Please get it downloaded here: www.driverslab.com/drivers/Camera/Canon/16/22.html
www.usa.canon.com/cusa/controller?act=OPDMSDSAct
www.driverskit.com/Camera/Canon.html

Best regards, Jay

Buy an inexpensive card reader to download your pictures to a folder you create on your desktop.

If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

After downloading is finished, unplug the USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Some Canon camera is not Vista compatible and cannot work on Vista.

If you only want to copy the images from your G3 onto your PC, you can use the pre-installed Windows XP application (if you have that OS) for that purpose. If you need the full S/W package, please go to the Canon Website;
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=321&modelid=8056

Dear diksi:

Unfortunately your G3 is incompatible with Windows Vista. To
do downloads to your computer you will therefore have to utilize a compact flash card reader. You can get them from any store that sells digital cameras. I bought one from Wal-Mart three months ago for $14.00.

You can still load and use your software however. You just won't be able to download using Canon Camera Window.

Hope this helps.

Sincerely,
HeavyDLB

Hi,

Download here from Canon.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=321&modelid=8056

Pick Vista as your operating system.