Minolta cf 3102 error code C-0045 - Minolta Office Equipment & Supplies

https://www.manualslib.com/manual/833463/Konica-Minolta-Bizhub-Pro-C5500.html?page=128


Konica Minolta bizhub PRO C5500 Solution Manual 3102 2211 12 13 14 4520


https://www.justanswer.com/printers/6mjlm-hi-i-hope-help-konica-minolta-bizhub.html

1. Turn OFF the main power switch.
2.Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the T reset appears
3.Touch [Trouble Reset].
4.Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, wait 10 seconds and fire the machine back up, this should reset the service code and with any luck the machine will run!

Solution ID TAUS0800276EN* Solution Usage 1
Description
C-3102 (C3102).
Solution
CAUSE: Fusing roller failure to turn due to a broken Fuser Rotation Sensor Holder.
SOLUTION: Replace Broken Fuser Rotation Sensor Holder (p/n A00J 7323 01).

Hi,
from what I've read here:
Error Codes Konica Minolta bizhub 163

, this is a Fusing Cooling Fan Motor malfunction, which suggests, I'm afraid, that you have to have it serviced.

Kind regards,
Jon Erik

Fusing unit motor or release senor will require a technician to fix.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

have tech come out to resolve this not easy fusing motor issue and or sensor or both

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you are looking for PC drivers, then my website covers everything up to and including Windows 8 / 8.1 ..... take a look here:
www.michelsplace.co.uk/minolta-cf3102.html

http://www.konicaminolta.hk/hk/en-us/download-driver-download-result.php?search2=true&category=-1&subcategory=-1&product=-1&os=3&emulation=36&=Search

You have Minolta dialta CF 3102
The C0094 code -2nd transfer roller separation.Clean using vacuum cleaner the transfer unit and the electrical contacts.

DO NOT UNDER STAND?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

i would start with replacing the magenta image unit yes