Minolta bizhub 164 black and white, change drum

Mazidul Islam
8724875511

press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good.

press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good.

press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good

Press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good.

press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good.

replace the drum and developer and clear the counter also ensure you run the F8 after developer been replaced and new drum are installed

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Replace the drum and developer first. Resetting counters with out replacing parts is not good. The machine works on base on counter info you reset counters then not replace parts the copier will adjust voltages on certain items when in fact they are same items image problems and codes.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

When is the last time the drum and developer where replaced? Machine is waiting for certain issue to be conducted internally. so the machine giving you this message. Also check to make sure that the developer unit or drum cartridge is cleaned.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Replace the drum and developer.