No display Processor FAN is moving, HDD scencing, RAM is OK. But No display

Its ram problem in most cases.First check it by removing rams of your system,second check hdd.
when system display screen its firs load in ram for processing then processor send it to vga and if ram have problem then processor unable to process msg for you and you unable to see screen.

The problem with RAM or DISplay card(It can be Moisture problem) or Processor Fan is not working properly. Open the CPU case, locate RAM, remove the ram by opening the both side clips. and put the RAM back as it is. If you have Graphics card on your CPU then remove the Graphics Card also and put it back as it is. Start the PC with opened case to check Processor Fan is Rotating or not. If Fan is not working properly then you have to replace the Processor FAN. Fan ok but same problem persists. you have to replace RAM with new one. as well as Graphics (Display) card.

first check ur display cable for breakr if you have built in display disable it in bios and and if you have addon display card remove them insrert a new addon diplay card if you have display the display section in you motherboard is faulty or diplay add on card is faulty if it still dont work the clock and reset section in your motherboard is fulty to find the at the above section if you have a multimeter check the pci slot A15 means the pci pins facing the processor must have 5v if this is ok your motherboard is ok and the problem is with your display card

It is a memory problem. Verify if they are plugged in the mainboard slot.

No beep or sound means Motherboard Defective, aside from Processors is OK, Memory is OK, and the rest!
Buy a new one not as the same Motherboard you use. ASROCK Motherboard are have a a problem when high temperature occur.

If i am helpful to you, please rate me.
Thank you.

Yboyandrei

845gvsr no display given ram beep but ram ;ram ic and bios is ok what can i do sir

DEAR,

AS PER YOUR PROBLEM I THINK YOUR COMPUTER WORKING WITHOUT ELECTRIC EARTHING. PL FIRST COMPLETE EARTHING WITH ELECTRICIAN.

YOUR EARTHING IS NOT PROPERLY PL CHECK THAT:-- ELECTRIC SHOK ON PC BODY.

YOUR PROBLEM WITH POWER SUPPLY OR PROCESSOR,MOTHERBOARD.

PL FIRST CHECK POWER SUPPLY,SECOND CHECK YOUR PROCESSOR WITH ANOTHER PC MOTHERBOARD.

ther is problem in your ram socket on the mother board

First, try resetting the CMOS. If it is not working, replace the RAM. Could be a damaged RAM

Any beep codes?