I already have one Jabra BT 250v and loved it so I bought another for my daughter, used but in excellent condition. I have tried both chargers and it doesnt seem to charge or turn on. The light blinks once (blue) when the connection is made in the charging cradle, but thats all. It will not turn on after leaving it on the charger overnight either. Whats wrong with it? Can it be repaired for a reasonable cost?
Thanks! KellyI already have one Jabra BT 250v and loved it so I bought another for my daughter, used but in excellent condition. I have tried both chargers and it doesnt seem to charge or turn on. The light blinks once (blue) when the connection is made in the charging cradle, but thats all. It will not turn on after leaving it on the charger overnight either. Whats wrong with it? Can it be repaired for a reasonable cost?
Contact me at: [email protected]
Thanks! Kelly
AnonymousJan 12, 2009
When connected to the cradle a blue light blinks once and then nothing. The headset was not used for a while. Can someone please tell me whats wrong and how I can solve this ? Thanks in advance
When connected to the cradle a blue light blinks once and then nothing. The headset was not used for a while. Can someone please tell me whats wrong and how I can solve this ? Thanks in advance
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please follow the detailed instructions below for the proper pairing of the headset with your phone.
CHARGING Before using, you must first charge your headset. 20 minutes = minimum charge 2 hours = full charge Light is solid red when battery is charging. NOTE For the best user experience, keep your headset fully charged. CAUTION Do not use headset while charging and do not connect the charger while the headset is in use.
POWERING Press the control button for 2 seconds to power on. Press the control button for 3 seconds to power off.
PAIRING Step One: Prepare Phone- Turn on Bluetooth For most phones, go to Settings/Tools menu and select Bluetooth or Connectivity and select "On." Step Two: Prepare Headset- Pairing Mode Begin with headset turned off. Turn headset on (hold call control button for four seconds until the light flashes blue) and it will automatically go into pairing mode, flashing red and blue. Step Three: Pairing- Add Headset to Phone For most phones, go to Settings/Tools > Bluetooth > Search or Add a Device, then Select "220Plantronics." For passkey enter 0000. Headset will flash blue when paired successfully. It is now powered on and ready to use.
NOTE: Normally you only need to pair the headset and handset once. If headset has been previously paired with another device, follow pairing instructions below.
If headset has been previously paired with another device, please follow these instructions for pairing a second time. Be sure the headset is fully charged.
Begin with headset turned off. 1. Press and hold down the call control button for 8 seconds until the headset status indicator begins to flash blue then red.The headset is now in pairing mode for the next 120 seconds. 2. While the headset is flashing,use the phone menu to search for Bluetooth devices and select "220Plantronics." 3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully.
NOTE: The headset can pair to multiple Bluetooth devices, but will only connect to one device at a time. The headset will automatically connect to the last device to which it was connected. Please don't forget to rate me if satisfied.Thanks for choosing Fixya.Good Luck.
First, make sure to charge the unit for a few hours. Next, try pairing with the following link:
How to Pair Plantronics Voyager Pro Bluetooth Headset
If it still doesn't enter pairing mode, the unit is defective and needs to be replaced. It comes with a 12 month warranty. Contact your supplier to receive a replacement.
Good Luck from Headsets Direct!
ou need to sink firs hold the buttin in till it flashis gren and red the go to the phone search bluetooth device it will then go green and should be connect
I am sorry to say but the Plantronics are cheap and not well made. Sounds like you might have a weak battery and because of that it wont have enough charge to turn on. I myself have gone through many and now spent a little bit more and got a better earpiece.
hold call button down till it blinks, than youll get intermitant light for about 30 seconds, than youll know its on. to turn it on hold call button down till it starts blinking at least 6 seconds. to turn it off hold call button down , itll blink for about 3 seconds than move your thumb off and when it ceases to blink its off. good luck
First when ya call connects, hit the Menu key (three lines inthe center) choose USE HANDSET.
Second Make sure the Bluetooth is fully charged, andit seems to lose charge fast.
I already have one Jabra BT 250v and loved it so I bought another for my daughter, used but in excellent condition. I have tried both chargers and it doesnt seem to charge or turn on. The light blinks once (blue) when the connection is made in the charging cradle, but thats all. It will not turn on after leaving it on the charger overnight either. Whats wrong with it? Can it be repaired for a reasonable cost?
Contact me at: [email protected]
Thanks! Kelly
When connected to the cradle a blue light blinks once and then nothing. The headset was not used for a while. Can someone please tell me whats wrong and how I can solve this ? Thanks in advance
×