Push2tv error Cannot obtain network address. I have tried all of the troubleshooting help but to no avail. Any ideas.

Turn on the Wi-Fi and connect to a network. Long press on the connected network and select Modify Network. On IP Settings drop down menu, select Static. Assign IP of your choice but leave other variable untouched.

How to Fix Failed to Obtaining IP Address Error in Android

Method 6: Assigning a static IP address

1. Go to Settings > Wi-Fi and long press on the network that refuses to connect.
2. Tap on Modify Network.
3. Scroll down and make sure the Show advanced options box is checked.
4. Change the IP settings to Static.
5. In the IP address field, change the last octet with any number from 10 to 255.

More items...
•
13 Sep 2018

Fix: Failed to Obtain IP Address - Appuals.com

To give your computer a fixed (static) IP address:

1. Open the Activities overview and start typing Network.
2. Click on Network to open the panel.
3. In the left pane, select the network connection that you want to have a fixed address. ...
4. Click on IPv4 or IPv6 in the left pane and change the Addresses to Manual.

More items...

Create a connection with a fixed IP address

When a malfunction arises the device fails to obtain an IP-address within the available network. Your device disconnects the network automatically, then tries to connect once more to obtain an IP-address again. The attempts don't stop. There are several reasons which cause the "Obtain IP Address" error.14 Oct 2017

How to fix when Wi-Fi is stuck "Obtaining IP Address"?

IP Configuration Failure: Your router may be failing to assign a proper IP address. Usually, this issue can be solved by simply restarting the router. You might be in a poor network coverage area: Shift your device to the area where the network signal is good.

How to Fix Failed to Obtaining IP Address Error in Android

Try plugging the desktop into another router port. Recycle the router. Set both your desktop and laptop to obtain IP address automatically. Make sure router is dynamically assigning IP addresses. Make sure your Domain and Workgroup settings are the same on both machines. Those are just a few ideas. :) Hope it helps.

On your computer wireless card configuration, try changing the fixed IP address to the following -.
In the TCP/IP Protocol set Obtain an IP address automatically and set Obtain DNS server address automatically.

Jim,
It depends how you connected the Netgear Push2TV adapter to your TV. The best way is to connect using an HDMI cable. Pay careful attention to which HDMI input you use in the Panasonic TV. Then using the remote control for your TV switch to that input. Usually there is a button label "Input" or "source". Make sure the Netgear Push2TV adapter is turned on and when you are switching among the various inputs you will see the Welcome screen on one that corresponds to the Netgear Push2TV adapter.

"IP conflict on Network" -> means your have 2 or more clients (PC terminals) having the same IP addresses on a workgroup on the Network!

You have to reconfigure your network TCP/IP settings from your Network Connections. You can reconfigure the settings using "Obtain an IP address automatically & Obtain DNS server address automatically or do a manual settings using alternate configurations"

Hope it helps.

For the not so tech savvy users it is quite complicated.

The network card should be configured to obtain a IP address automatically,
Open Control Panel - click on Network Connections - right click on the network/wireless card - select Internet Protocol (TCP/IP) and click on Properties and then enable Obtain an IP address automatically and enable Obtain DNS server address automatically.then click OK and click OK again.

Here is a link to their Support site: http://support.xbox.com/support/en/us/nxe/default.aspx Select "Troubleshooting/Connection" errors page. On the LEFT, select "Network Help". That should put you in the area you need.

First make sure that your wireless router is set to broadcast (or if you prefer not to broadcast) your SSID (your wireless network name) or that your laptop wireless network connection properties is set-up to "Connect even if this network is not broadcasting".

To check this go to:

Click Start> Connect to>Show all connections>
Right click your Wireless Connection and select properties>
On the Properties box select "Wireless Network" tab >
Go to "Preferred networks" then highlight your SSID (network name)
Click "properties" button check "connect even if this network is not broadcasting". (while youre here check that your "Wireless network key" confgurations are correct).

Make sure that you are also set-up to "Obtain an IP Address automatically " and "Obtain DNS server address automatically"

To check:

Click Start> Connect to>Show all connections>
Right click your Wireless Connection and select properties>
Select "General" and under the heading "This connection uses the following items">
Highlight "Internet Protocol (TCP/IP) then click "Properties" button

Are you trying to get an IP for your computer, or for your modem? Assuming your using a high-speed connection, possibly a router?

If you have Vista,

1. Go to START > CONTROL PANEL
2. Under Network and Internet, click VIEW NETWORK STAUTS AND TASKS
3. On the side panel, click MANAGE NETWORK CONNECTIONS
4. Right click your Wireless network, and click PROPERTIES
5. Single-Click Internet Protocol Version 4 (TCP/IPv4)
6. Click Properties
7. Write down all the infromation in case you need to type it in again later.
8. Click "Obtain an IP address automatically" and "Obtain DNS server address automatically"

Sorry, but I cannot help with XP at the moment.
Good luck!